Hardware: SRX340, EX4300
Sofware version: SRX340 : 15.1X49-D50.3 EX4300: 14.1X53-D35.3
Doing LACP between a pair of SRX340 and EX4300. No problem with LACP configuration and all interface are up.
When trying to add new RETH sub interface. It will not come up. Existing RETH sub interface are working fine. The only way to get RETH1.60 up is to reboot the firewall. Anyone has seen this issue before?
set interfaces reth1 vlan-tagging
set interfaces reth1 redundant-ether-options redundancy-group 1
set interfaces reth1 redundant-ether-options lacp passive
set interfaces reth1 redundant-ether-options lacp periodic slow
set interfaces reth1 unit 60 vlan-id 60
set interfaces reth1 unit 60 family inet address 192.168.173.250/2
set interfaces reth1 unit 10 vlan-id 10
set interfaces reth1 unit 10 family inet address 192.168.171.250/24
reth1.10 up up inet 192.168.171.250/24
reth1.60 up down inet 192.168.173.250/24