Tried this....still no Joy.
Cleared arp table still pulled wrong IP
Cleared binding dhcp server for irb still came back and pulled wrong IP
@FW1> show configuration | display set | match MS1
set access address-assignment pool DHCP_Pool family inet host MS1 hardware-address b8:27:eb:ed:b0:37
set access address-assignment pool DHCP_Pool family inet host MS1 ip-address 192.168.0.205
@FW1> show arp
MAC Address Address Name Interface Flags
00:01:5c:71:c6:46 64.20.130.1 64.20.130.1.dyn-e-pool3.p ge-0/0/0.0 none
b8:27:eb:5d:e7:c6 192.168.0.9 192.168.0.9 irb.0 [ge-0/0/5.0] none
00:16:a2:01:24:e6 192.168.0.10 192.168.0.10 irb.0 [ge-0/0/5.0] none
00:1f:5b:00:82:5b 192.168.0.11 192.168.0.11 irb.0 [ge-0/0/5.0] none
4c:82:cf:01:67:8a 192.168.0.12 192.168.0.12 irb.0 [ge-0/0/5.0] none
00:0d:c5:4d:51:b9 192.168.0.13 192.168.0.13 irb.0 [ge-0/0/5.0] none
18:b4:30:06:13:8f 192.168.0.14 192.168.0.14 irb.0 [ge-0/0/5.0] none
b8:27:eb:ed:b0:37 192.168.0.19 192.168.0.19 irb.0 [ge-0/0/5.0] none
00:23:63:27:b9:9b 192.168.0.200 192.168.0.200 irb.0 [ge-0/0/5.0] none
↧