Hi,
From the configuration provided, I could see that on ASA the tunnel-group is using IP 111.111.111.111 and on the SRX you have configured the local-identity to use is again 111.111.111.111.
As Spuluka updated we do not require to configure the general-Ikeid as we have already mentioned the local-identity.
Also can you let us know what is the IP used on the ASA which is part of the zone outside, because you have enabled the ikev2 on the interface outside.
please remove the local-ikeid and let us know if that helped.
regards,
Guru Prasad