When I first got my 240 I had to figure out one key issue. Here is the link. I had hughesnet then and this did the trick. I don't know if you already have an internal ip at the modem, or if it's an external one. My setup assumes it is external. The key thing I remember being different is that hughesnet required a special step. Comcast did not. Here is a link to the thread. Maybe hughesnet is like DSL. It certainly had the same speeds at that time. 2011, 10mbps. I used port 0 on the srx because it is already ready for this. As I remember correctly it only received limited traffic like you noted. https://forums.juniper.net/t5/SRX-Services-Gateway/srx240-internet-setup-help-hughesnet-dhcp-nat/m-p/268303#M33699
↧