Re: services dhcp-local-server vs service dhcp and vlan
Factory default configuration will only have config specific to DHCPD. DHCPD will become obsolete in newer versions and then we can expect to see JDHCPD config as default.
View ArticleRe: services dhcp-local-server vs service dhcp and vlan
as jsameer already wrote, dhcpd will be obsolete. Actually from 15.1X49-D60 (released 3 days ago) the dhcpd-configpart is hidden and a warning shows at each commit stating that you should convert to...
View ArticleRe: services dhcp-local-server vs service dhcp and vlan
Refer to below link for more details:https://kb.juniper.net/InfoCenter/index?page=content&id=TSB16991&smlogin=true&actp=search The TSB will continue to be updated as the deprecation plan...
View ArticleSRX-210 as an L2TP client?
Hi everyone, I was wondering if with the latest releases it was now possible to have the SRX-210 act as a PPTP/L2TP client.. dialing out to a vpn provider, and then able to reroute certain subnets over...
View ArticleClik here to view.
Re: Strange behavior on srx345 in cluster mode.
Hi all, shyan wrote:I had same issue and when i disabled the member interface of reth from passive device then It worked. Actually srx loadbalance the packet on member interfaec of reth so when packet...
View ArticleClik here to view.
Re: Strange behavior on srx345 in cluster mode.
Raveen wrote:I see that you have configured same subnet ip-addresses for multiple reth interfaces.You could run show route and check route that SRX takes to respond. Regards,Raveenyes, it's only for...
View ArticleRe: detect unused objects in SRX Firewall
Hi, You could possibly do an offline analysis on a Linux machine for example.Step 1: Compile list of applications & application-setroot# show applications | match application | match { application...
View ArticleRe: services dhcp-local-server vs service dhcp and vlan
jonashauge wrote: 15.1X49 is for the new SRX300 series, 550M and 1500 so I don't expect this behaviour to be put into 12.1X or 12.3X for the legacy SRX200 series... so as long as you have your SRX240...
View Articleaddress-set - Rule Drops
Hello, Currently Runnig Junos Space (Latest Version) to manage a few SRX3600 We have a strange issue with rule drops. Basically at random points in the day we loose address from address-set. meaning...
View ArticleRe: Strange behavior on srx345 in cluster mode.
Just remove the same IP subnet configured from reth interface except the untrust zone interface then see.
View ArticleRe: Juniper SRX 100 no storage error
Can you confirm the bootable USB created on the working SRX100 boots on that same SRX100 This will confirm you have a good bootable USB. If that works on the good SRX, and will NOT boot on the...
View ArticleRe: VPN tunnels monitoring
Dears, We still need the mentionned OIDs.Please is there anyone who faced this issue ans succeeded to find out the solution. I am looking forward to reading your notes, please. Best regards.Bassem
View ArticleRe: Selecting the right SRX
Indeed, you guys are right, its best to get as much info as possible to choose the right firewall.
View ArticleRe: services dhcp-local-server vs service dhcp and vlan
Correct, for now no changes are expected to happen to 12.1X and 12.3X software trains.
View ArticleRe: VPN tunnels monitoring
I've setup some active VPN tunnels and run the snmp mib tests on the Junos command line. I get the same results you mention, no results, and I can see the active SA on the box at the time. So these...
View ArticleRe: SRX 340 OSPF Advertise entire /23 when only portions of the subnet...
As Ashvin notes, this is really the expected behavior for OSPF route distribution. This limitation is one reason a previous place that I worked moved to using eBGP as the internal protocol. Then you...
View ArticleRe: SRX Stateless UDP mode
Your other option would be to create a custom application and set a very low timeout value in seconds. that way the sessions will clear more quickly.
View ArticleRe: SRX config for Playstation
I don't know, that guide is asking you to open a vast list of both tcp and udp ports to the entire internet pointed at your game system. I can't believe that in this day and age major companies like...
View ArticleRe: SRX-210 as an L2TP client?
Unfortunately, no you cannot have the SRX act as a client for this type of VPN connection.
View Article