Re: CHASSISD_FASIC_HSL_ERROR
Hi Afridi, The error shows that the SFB had some issues.These could be investigated using chassisd logs and I would recommend you to open a case with JTAC if you want to look further into it. As of...
View ArticleRe: Skype Business desktop sharing
Having the exact same problem. Did you find a solution ?
View ArticleBandwith limiting per user
Hello guys, For a customer i have to implement an SRX320 with an ADSL2+ connection.Because the connection is relatively slow i want to bandwith limit all users on the lan side so everybody has the same...
View ArticleRe: Bandwith limiting per user
http://forums.juniper.net/t5/Day-One-Tips/Junos-Policer-bandwidth-limit-configuration-example/td-p/282622
View ArticleRe: commit failed
Hi, While connected via console:1. show configuration | no-more | save current-config (I'd also recommend to take a local backup to your workstation as well, just in case)2. start shell user root3. cd...
View ArticleRe: SRX300 TCP-MSS
Hi,If you're running pp0 interface on the SRX300 series , you can configure it by the following commad:set interfaces pp0 unit 0 family inet mtu 1300or globally configure the tcp-mss:set security flow...
View ArticleRe: SRX300 TCP-MSS
Hi, Thanks for your help, but we have it in packet mode and not flow mode, see below, I have tried dropping the MTU to 1300 but it still fails to work. I also tried changing TCP-MSS. Please see...
View ArticleRe: Proxy-arp on redundancy interface
Still looking for the solution (If there is one).
View ArticleRe: Dynamic VPN client can only access some protected resources?
Ok, so I've added a new policy of: from-zone Internet to-zone Cameras { policy Dynamic-VPN { match { source-address any; destination-address any; application any; } then { permit { tunnel { ipsec-vpn...
View ArticleRe: Dynamic VPN client can only access some protected resources?
Good that you got the Camera part working. From my knowledge of policy-based VPN vs. route-based I have to disappoint you. policy-based (which is what dynamic VPN utilizes) is a point-to-point VPN...
View ArticleClientless VPN to SRX not possible?
I am a big supporter of all things Juniper, we run SRX's, EX's, MX's, SA's and MAG's I have read a few posts on the forums about creating dial-up VPN's using native clients to establish tunnels to SRX...
View ArticleRe: Cannot Ping between Interfaces (Host) SRX340
Hi,Try changing the application in both policies , from junos-icmp-ping to junos-icmp-all .
View ArticleRe: Clientless VPN to SRX not possible?
You should be able to do an IKEv2 VPN with the native Windows VPN client.
View ArticleRe: Cannot Ping between Interfaces (Host) SRX340
Thanks for prompt reply. However, I still cannot ping the host
View ArticleRe: Cannot Ping between Interfaces (Host) SRX340
OK , so you changed the application to junos-icmp-all on both policies and still cannot ping .Can you share with me the 'show route' output ?Have you configured the appropriate default gateway on both...
View ArticleRe: How to configure IPSec RemoteVPN on new branch SRX?
I tested this today using a similar config that I had used on the previous series branch SRXs. The pulse secure client gave the error "failed to receive http response." I thought that was odd since...
View ArticleRe: Cannot Ping between Interfaces (Host) SRX340
I thought Iwas wrong or missed something .. but your configuration seems to be correct with no issue!i replicated it in my lab (with SRX100 NOT 300) to see what might be cousing no ping between two...
View ArticleIs it possible to send syslog files content to some server/pc?
I want to send the content from some syslog files that I have already created to my PC for example. The logs I want to send are 2 only, one of them shows all network traffic, and the other one shows...
View ArticleRe: Cannot Ping between Interfaces (Host) SRX340
Can you make a traceroute from one host to another? Also, if you try to see traffic logs, can you see these connection attempts?
View Article