Command to check the bandwidth in SRX
Hello , Is there any command to check the bandwidth of traffic passing through the srx 650 for inspection of throughput ? Please HELP Regards,
View ArticleRe: DHCP lease time not being respected
the code you are telling me to replace with is having [edit] and root# and you know that any small error can mess things upi mean this is the gateway to my whole infrastructure here. Will be great to...
View ArticleRe: Command to check the bandwidth in SRX
Hello, 'monitor interface traffic' will give you pps for all the interfaces. https://www.juniper.net/techpubs/en_US/junos13.2/topics/reference/command-summary/monitor-interface.html#jd0e580 Regards, Rushi
View ArticleRe: Site-to-Site VPN with Inline Transparent Web Filter
It works. I'm just tracking down some OSPF issues so all the routes get advertised correctly and then I'll post the config.
View ArticleRe: Route-based VPN on SRX3600 mysteriously drops packets
Wow indeed...SRX5400 in HA cluster at 15.1X49-D50.3 Above procedure from unktone made one of my tunnels finally work!
View ArticleRe: Route-based VPN on SRX3600 mysteriously drops packets
5 years and only a cludge of a fix, really?Was JTAC engaged?Was there a PR for this issue?
View ArticleRe: l2cpd-service is thrashing, not restarted ntpd-service is thrashing, not...
Yes, theser are false positive and Juniper TAC/Engineering team is aware about this and work is in progress. Till we get a fix you may supress these logs as in KB9382https://kb.juniper.net/KB9382
View ArticleSIEM cannot received log when SRX using stream mode?
Hi All, May i know whether we need do some special config to make SIEM can received log from SRX using stream mode? Or does SIEM need special setting that it can received log stream from SRX? I'm...
View ArticleRe: SIEM cannot received log when SRX using stream mode?
Hi, Please share your configuration from the SRX. What is the output of "show route <SIEM IP>" ?Is that interface through which SIEM is reachable, part of a VR ?What is the source address being...
View ArticleRe: SIEM cannot received log when SRX using stream mode?
Hi sahilsha Below is the config. FYI, no issue reachibility from SRX to SIEM. Previously the mode is "event" but due to CPU high in SRX then i change using stream mode. After i change to stream mode...
View ArticleRe: SIEM cannot received log when SRX using stream mode?
Hi, Thanks for providing the configuration. Please answer the following questions as well :- What is the output of "show route <SIEM IP>" ?Is that interface through which SIEM is reachable, part...
View ArticleRe: SIEM cannot received log when SRX using stream mode?
Hi sahilsha There is no VR in this firewall. If just change the mode supposedly it not issue right? {primary:node0}test@srx5800> show route x.x.x.xinet.0: 16 destinations, 18 routes (16 active, 0...
View ArticleRe: SIEM cannot received log when SRX using stream mode?
Can you confirm that the source address configured for logging ( 10.70.50.18) is on the interface facing the route to the SEIM (reth0.380).
View ArticleRe: SIEM cannot received log when SRX using stream mode?
Hi Spuluka, Yes, It's confirm. The issue that it's work on mode event but after i changes on stream mode the SIEM not received any log from SRX. But when i changes back to mode event then no issue for...
View ArticleRe: SIEM cannot received log when SRX using stream mode?
Hi, Please provide the following output from shell :- %srx-cprod.sh -s spu -c "sh usp rtlog conn"%srx-cprod.sh -s spu -c "sh usp rtlog stream" Regards,Sahil...
View ArticleHigh availability between srx210H and srx210HE
Hi everyone,i have srx210H and srx210HE.is it possible to deploy high availability in both devices? And the next question is that for control link and fabric link the same STP category 6 cables are...
View ArticleRe: High availability between srx210H and srx210HE
The cabling used for the HA are standard ethernet cables. You could successfully cluster an H to an HE device. Naturally any cards in the slots must match on both devices. But you will need to be...
View ArticleRe: SIEM cannot received log when SRX using stream mode?
Sorry, I missed this little note above:After i change to stream mode then SIEM not received log from SRX. But using Junos Space Log Collector no issue.I would do a packet capture on the SIEM or the...
View ArticleRe: SIEM cannot received log when SRX using stream mode?
Hi Shilsa, Does command that u inform need root previlege? Just for tour information the SIEM is "McAfee ESM" with ver 9.6.0. % srx-cprod.sh -s spu -c "sh usp rtlog steam"======== Start SPU0.0,...
View ArticleRe: SIEM cannot received log when SRX using stream mode?
McAfee seems to be recommending the configuration be done in the syslog hierarching instead of security log hierarchy. Not sure if that makes a difference in the log formatting or not....
View Article