Quantcast
Channel: All SRX Services Gateway posts
Browsing all 17645 articles
Browse latest View live

Re: SRX cluster 30% packetloss

I am facing exactly same issue with the Juniper SRX240H model running software version 12.1X44-D40.2.Packet loss disappears once the traffic is failovered to standby firewall. Issue is re-occuring in a...

View Article


Re: SRX200 migration to SRX300 two vlan.irb through trunk interface to...

Did you set the l2 learning to switching mode? set protocols l2-learning global-mode switching By default, it is set to transparent bridge in the version of Junos you are running.

View Article


Re: SRX200 migration to SRX300 two vlan.irb through trunk interface to...

IRB's were not stable on SRX300 series before 15.1X49-D50 and there were issues with JDHCP on irb's until 15.1X49-D60, so please upgrade before debugging futher. Please remember the set protocols...

View Article

Re: "web-authentication https" not supported on SRX300 running 15.1X49-D70.3?

Hi,This is a known issue and bug report is already open for this. This should be fixed in the upcoming releases.Anand

View Article

Re: SRX200 migration to SRX300 two vlan.irb through trunk interface to...

upgraded to  version 15.1X49-D75.5;Have made sure that global l2-learning is on switch mode - comparing the rollback it looks like it was already.Corrected the Inner vlan to member:    "Thank you...

View Article


DCHP-Relay Question

I have two DHCP sources that I am using that goes through a trunk port to a wireless AP.  The DHCP-RELAY is used in conjunction with the windows domain and is used on everything with everything but the...

View Article

Re: SRX Sending logs to SYSLOG Issue

Done everything you suggested no logs were written

View Article

Re: SRX Sending logs to SYSLOG Issue

Hello , Going through config again , can you configure the following and test : {primary:node0}[edit]root# show system sysloghost < syslog-ip> {    any any;    match RT_FLOW;}

View Article


Step by Step procedure to remove route based & dynamic vpn configuration on SRX

Hi, Can someone help in removing route based & dynamic vpn configuration on SRX so that there are no errors while commiting the configuration.  Thanks,Kunal Tupe

View Article


Image may be NSFW.
Clik here to view.

Re: Step by Step procedure to remove route based & dynamic vpn configuration...

Hi Kunal, i think many of the contributors in here can help with this - but for this, please share your configuration as a starting point

View Article

Re: DCHP-Relay Question

set forwarding-options dhcp-relay server-group FFFFdhcp 192.168.2.2 interface irb.4Did you configure your irb.4 interface?

View Article

Re: DCHP-Relay Question

set forwarding-options dhcp-relay server-group FFFFdhcp 192.168.2.2 interface irb.4interface irb.4 is not a valid option.  This is why I have the question on if there is a place to configure it to a...

View Article

Re: DCHP-Relay Question

Hmm what platform and junos version are you migrating to?

View Article


Re: DCHP-Relay Question

Moving from the SRX240 to the SRX300recently updated to the latest version: 15.1X49-D75.5;

View Article

Re: Step by Step procedure to remove route based & dynamic vpn configuration...

Hi Jonas, Below is the configuration. Let me know if i missed to add any.  set security ike proposal Dyn-VPN-Proposal authentication-method pre-shared-keysset security ike proposal Dyn-VPN-Proposal...

View Article


Re: DCHP-Relay Question

Okay this is it: set forwarding-options dhcp-relay server-group FFFFdhcp 192.168.2.2 set forwarding-options dhcp-relay group relay1 active-server-group FFFFdhcp set forwarding-options dhcp-relay group...

View Article

Re: Step by Step procedure to remove route based & dynamic vpn configuration...

Hello Kunal,I am assuming that you want to remove the proposal and policy for these VPNs as well. If not, start from point 2:1)delete security ike proposal Dyn-VPN-Proposaldelete security ike policy...

View Article


Not working:Site-to-Site VPN with SRX300 and Vyatta behind NAT on the firewall

Hi, PLS can someone take a look and shed some light why SRX is not reply on port 4500 when devices tring to establish VPN. Vyatta perfectly works with other devices been behind NAT, also Juniper works...

View Article

SRX340 as Internet Gateway

Hi!I am working for the first time with a Juniper equipment.I am trying to set up my machine (SRX340) as the internal network internet gateway.I do not have any VLANs, I just wish all computers in the...

View Article

Re: Not working:Site-to-Site VPN with SRX300 and Vyatta behind NAT on the...

Here is sample config for SRX if anyone interested to look at it

View Article
Browsing all 17645 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>