Re: Anti-virus Kaspersky not working with temp license
Hi, Try to reconfigure the custom file extenstion list to remove the 'dot' from the values ( .zip to zip) Refer below mentioned URL for configuration...
View ArticleRe: Logging not send to syslog file
Hi,Which SRX model you are using?Also share the output of "show security policies hit-count"
View ArticleRe: Anti-virus Kaspersky not working with temp license
I change it , but it no affect.admin@SRX> show security utm anti-virus statistics UTM Anti Virus statistics: Intelligent-prescreening passed: 0 MIME-whitelist passed: 0...
View ArticleRe: Anti-virus Kaspersky not working with temp license
I change it , but it no affect.admin@SRX> show security utm anti-virus statistics UTM Anti Virus statistics: Intelligent-prescreening passed: 0 MIME-whitelist passed: 0...
View ArticleRe: Anti-virus Kaspersky not working with temp license
I assume you are initiating the traffic from trusted to ISP. If yes, apply the utm policy to trusted - ISP policy.
View ArticleRe: LCC 0 offline
Hi, Kindly find below the required output. show chassis alarms node0:--------------------------------------------------------------------------No alarms currently...
View ArticleRe: Logical system
Hi, Can you please help to clarify which session you are referring to? When you run logical-system, there is a separate instance of RPD(routing protocol daemon) created for that specific...
View ArticleRe: Anti-virus Kaspersky not working with temp license
Thank you very much. It work.But it not clear for me. Initiating traffic from trusted zone is scanning write now. But what about incoming traffic from ISP zone.Please clarify how scaning process...
View ArticleClik here to view.
Re: Logical system
i was reading in the JNCIP material and i was confused , for example if a telnet session path through 2 LSYS , this will cause 2 session , and what if a telnet session path through 2 routing...
View ArticleSCTP NAT
Has anyone implemented NAT on the SCTP layer and if so can you perhaps share your configuration.
View ArticleRe: SCTP NAT
NAT rules are setup separtely from the security policies. And the order of evaluation is noted in this packet flow.https://kb.juniper.net/InfoCenter/index?page=content&id=kb16110 So you need to be...
View ArticleRe: Sophos Anti Virus Engine running but not doing anything.
Please try to download test virus from http://www.eicar.org/85-0-Download.html using httpIf statistics won't show anything then please delete policy utm-security-policydlete security policies from-zone...
View ArticleRe: No idea on how to route my LAN traffic to Internet using SRX220 cluster
I couldn't find any issue with your configuration so I copy pasted it to may lab boxes I connected a host to ge-0/0/0 gave it an address form 10.1.0.0/24, gateway 10.1.0.10 and it works.
View ArticleRe: DNS-Doctoring
DNS Doctoringis a functionality where the firewall will look at DNS responses from your DNS servers for addresses that have a static NAT rule defined and will then change the IP in the DNS response to...
View ArticleRe: DNS-Doctoring
The only documentation I am able to see is https://pathfinder.juniper.net/feature-explorer/feature-info.html?fKey=166&fn=DNS+ALG+and+Doctoring+support RegardsVatsa
View ArticleClik here to view.
SRX5K SPU high utilization when proceeding unknown UDP packets
Dear all, We are testing SRX5600 performance with UDP packets which are used mostly in gaming application. The testing scenario is as the below: We have simply two subnets and two group of three...
View ArticleRe: Sophos Anti Virus Engine running but not doing anything.
AV usually work only for speicfic supported protocols. It would be a good test to see if the EICAR file download is detected bythe AV engine. You can also do a UTM trace option at that time to...
View ArticleHIGH SESSION UTILIZATION IN SRX 1400
Hi, I have a SRX 1400 where I have 1 NPC+SPC. Version is 12.1R5.5 which is very old so I can't go on expanding SPC.In cp session i can see below which points that max session are 1048576. However in...
View ArticleRe: Webserver not working
OK I changed the port of web management to 8081 as you can see on my conf below. Now when I access my external IP (187.72.138.193) from an external network on port 80 I got a timeout error.When I...
View Article