Re: SRX240H Power Loss: Cannot Login
Hello: Thanks for the information. I did get in via console. The system didn't have a root password anymore, so it just dropped me straight in. When I tried to regenerate the keys, the /etc/ssh...
View ArticleRe: SRX240H Power Loss: Cannot Login
Hello: Also, as a note, I tried this. root@fwwa> restart firewall-authentication-service warning: firewall-authentication-service subsystem not running - not needed by configuration. root@fwwa>...
View ArticleRe: SRX240H Power Loss: Cannot Login
Looks like the power outage corrupted the db. I would recommend you try another reboot or do a Junos re-install and then reboot. You can try installing same Junos version or do an upgrade.
View ArticleRe: ipv6 vlan interface
I dont think that limitation is there on 12.1X releases. PFB. Output from 10.2 release, inet6 is not available for VLAN root@Router-4> show version Hostname: Router-4Model: srx650JUNOS Software...
View ArticleRe: SRX tunnel to Cisco ASR configured for EZVPN?
EZVPN, is the VPN client ? if thats true you cannot have a VPN with SRX.
View ArticleCF ACT LED SRX650
Hello Community,I recently purchased two external compact flash memory cards for an SRX650 chassis cluster.Using a CF to USB convertor cable, I successfully managed to take a snapshot from the internal...
View ArticleClik here to view.
Re: ipv6 vlan interface
Yes I know .. but when I configured ipv6 on vlan interface I got a rejected route ..Thats why I asked
View ArticleEnabling TPM blocks any Junos upgrade on SRX
Enabling TPM makes any Junos upgrade on SRX impossible. If you enable TPM / MEK – the box needs to be rebuild from scratch using a local console access. There is no other way to disable TPM or do an...
View ArticleDownloadable access-list via radius
Hi All I'm new in this forum and in general to Juniper SRX.I struggling to find any documentation that can show me if SRX340 supports downloadable access-list per user vpnvia radius entries, and if...
View ArticleSTATIC DESTINATION NAT Question
Hi everyone. I have some questions about STATIC NAT. On Cisco Platform: SERVER--10.10.10.1------10.10.10.10 -F1-(INSIDE)--R1-F2-(OUTSIDE)-----INTERNET R1 is configured with STATIC NAT to translate...
View ArticleRe: STATIC DESTINATION NAT Question
Questions:1) Do we need to configure SOURCE NAT for return traffic? I believe we do not, but I just want to confirm. No. 2) This Static NAT ( destination) creats static entry in NAT table, does it...
View ArticleError when commit static nat two public ip into one private IP?
Hi all, How i can translate the screen os below config into srx. It get error when i do commit. On netscreen set interface "ethernet1/1:1" mip 71.10.11.30 host 192.168.10.1 netmask 255.255.255.255 vr...
View ArticleRe: Enabling TPM blocks any Junos upgrade on SRX
Hello,The link You supplied gives 404 error.The working link is https://www.juniper.net/documentation/en_US/junos/topics/concept/trusted-platform-module-security-understanding.htmlAnd what JUNOS...
View ArticleClik here to view.
Re: Enabling TPM blocks any Junos upgrade on SRX
Hi Alex, D110 is the newest one, so basically any version anyone might want to upgrade is affected. In my case its D90/D100. > If You enable TPM on JUNOS version older than D110, and then try to...
View ArticleRe: Juniper SRX 3600 how to define GRE and PPTP applications
root>show configuration groups junos-defaults applications
View ArticleRe: SRX210 behind ISP Modem
I have found that a simple ping will kill an srx. You must have a solid setup for pings. Have you tried static arp???
View ArticleSplit assigned /29 Subnet into two /30
I have a SRX that I am running in packet mode and am attempting some test configurations on it while I await my IP assignment from ARIN. The assigned subnet I have been given at the moment is a /29 -...
View ArticleRe: Split assigned /29 Subnet into two /30
10.0.0.182's default gateway in this context must be in the same subnet, so in this case 10.0.0.181. 10.0.0.177 is two hops away and is not directly reachable.
View ArticleRe: SRX210 behind ISP Modem
If you publish the Mac and ip it will be STATIC. Proxy arp is like what I said, PROXY.... I do not mean to use these instead of proxy arp, but rather WITH. Another thing. That modem really should be...
View Article