Re: Account Works in SSH but not HTTP after Firmware Upgrade
Thanks all, and sorry for the slow reply - didn't realize that J-Net didn't automatically subscribe you to threads you initiate.lpaniagua - I've set my logging per your suggestion and found no other...
View ArticleRe: Zone_Communication
Hi Shaan, """from 192.168.1.254 it should reach 192.168.4.254 as 192.168.2.2 and when 192.168.4.254 tries to reach 192.168.2.2 it should then NAT to 192.168.1.254 """I understand you want source NAT...
View ArticleCannot wipe SRX240
Hey J-Net Community, Having a problem when trying to completely wipe the config. I have held the reset button for 15 seconds and longer and have rebooted the device and cannot get the SRX240 to...
View ArticleRe: Cannot wipe SRX240
Hi, I would rather insist to recover the password. That is easy.Connect to ConsoleRebootLogin to single user modeChange Password and you would recover your lost password. Reference...
View ArticleRe: Cannot wipe SRX240
Else, If you still wish to go the reset path. The check to see if the reset is successful is the Status LED. Is the Status LED amber in your case ?? Quote from Juniper Documentation:-"Pressing and...
View ArticleRe: Cannot wipe SRX240
loader> boot -scan't load '/kernel'can't load '/kernel.old'no bootable kernel This is the output I am getting.
View ArticleRe: Cannot wipe SRX240
@rahulverma, I did this. The LED turns amber and then transitions back to green. I still am required to put the password in to which I do not know. wrote:Else, If you still wish to go the reset path....
View ArticleClik here to view.
Re: Cannot wipe SRX240
If loader cannot boot properly, suggest to format the device and do the test again, we want to make sure the system is cleanup as this might be some sort of corruption...
View ArticleMTU filter revisited...
I have implemented an MTU filter at value 1522 . As such.firewall { filter 1522mtu { term 1 { from { packet-length 1522-1522; } then { count 1522mtu_DROP; discard; } } term 2 { then accept; } }}My...
View ArticleHow do you boot from usb from => mode?
It appears the JUNOS image is missing. I have downloaded another JUNOS image from a healthy SRX240. However, I cannot figure out how to boot from USB and save the new JUNOS image from the mode I am in...
View ArticleRe: How do you boot from usb from => mode?
You are in U-boot prompt. I think you pressed SPACE key during autoboot and hence you are in that prompt. Reboot the device and boot into loader prompt and then try to recover from USB:Reboot the...
View ArticleRe: How do you boot from usb from => mode?
Hi, Matt I am assuming you already try the "reset" or "boot" commands and you reached the same prompt; if not please try them.If the SRX is getting stuck on uboot (not even reaching Loader) you could...
View ArticleRe: Account Works in SSH but not HTTP after Firmware Upgrade
Hi , This is confirmed to be an issue with Software, for now no workarounds other than Software fix. I just checked by downgrade to 12.1X46-D82 and can confirm that we do not have this issue (not able...
View ArticleRe: Jweb Incorrect user/password after Junos upgrade on SRX
This is confirmed to be an issue with Software, for now no workarounds other than Software fix.In the previous version (12.1X46-D82), we do not have this issue , could login to J-web.
View ArticleRe: Zone_Communication
Can you share the configuration on your SSG? What happens if you try to ping between the real IP addresses: 192.168.4.254 and 192.168.1.254? Does it work (assuming you have the routes configured as...
View ArticleRe: Account Works in SSH but not HTTP after Firmware Upgrade
pcamis, You are right, that junos version is EoL and the SRX model as well, so I dont expect Engineering to work on this, or at least we could not demand it. As confirmed you can move to the previous...
View ArticleRe: Cannot wipe SRX240
Matt, If you have access to uboot and loader you could also try the tftp Junos upgrade:...
View ArticleRe: MTU filter revisited...
Hi Eugene, Im not sure I understand what you mean with "Will adding a third term help me in terms of round trip improvement?", can you elaborate further? I dont think there is a way to know how much...
View Articlesrx4600 cluster connected direct to mx10003 pair
Hi experts,The customer want to connect there new srx4600 cluster direct to a pair of mx10003 (not via switch layer).The only working solution I can see is to create bridge domain + vrrp in both...
View ArticleRe: Account Works in SSH but not HTTP after Firmware Upgrade
Had the same issue after upgrading to junos-srxsme-12.1X46-D86-domestic.tgz on a SRX210BE. Downgraded to junos-srxsme-12.1X46-D82-domestic.tgz problem fixed. I can now access the web interface.
View Article