SRX300 Port Lights not working
Hello,Is it possible somewhere in configuration to "turn off" port link and activity led lights on stand alone SRX300 (19.2R1.8)?I have a strange situation that none of my port led lights aren't...
View ArticleRe: SRX300 Port Lights not working
This is fixed in 19.2R1-S1 and 19.2R2 https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1446035
View ArticleRe: Upgrade SRX240h-DC soft from 11.2R4.3 to Junos-12.1X46-D40.2-domestic
Hi Pelldis, As Andres correctly stated, if you would like to upgrade the device from 11.2 -> 12.1X46, you should upgrade to an intermediate release 11.4. However, it is quite difficult to get the...
View ArticleRe: Upgrade SRX240h-DC soft from 11.2R4.3 to Junos-12.1X46-D40.2-domestic
Hi!Moved version to 11.4, next I tried to move to 12.1x10 - same problem
View ArticleRe: Communication issue btw SRX1500 and multiple vSRX's
So I have finally solved this issue. I also believe there were 2 issues at play with one more problematic than the other. This ultimately resulted in MAC address conflicts for reth interfaces between...
View ArticleRe: Upgrade SRX240h-DC soft from 11.2R4.3 to Junos-12.1X46-D40.2-domestic
Hi Pelldis, Could you please elaborate on the issue which you're facing? Also, may I know why you've moved to 12.1X46-D10 rather than moving directly to 12.1X46-D40.2? Also, did you had a chance to...
View ArticleRe: How to view streaming logs via Jweb
thank you! yes i always do enabole 'log on session close' whenever i make a rule thank you very much
View ArticleRe: Dynamic VPN Configuration (SRX 340)
Good Afternoon Andres, I wanted to get a response out today with something to look over so I am supplying you with my config as it currently sits. I've been swamped today and was unable to run the...
View ArticleRe: SRX , SSG - Query
Hi Shaan, This seems to indicate server is not listening on 8083. I think from a configuration perspective there is not much here. Setting up the MIP and setting up the policy. I belive you had...
View ArticlePPPoE communication is not possible with PPPoE Server & Client of SRX
I am verifying SRX's PPPoE Server & Client with reference to the following video, but I cannot communicate with...
View ArticleRe: SRX , SSG - Query
I am seeing the traffic for ICMP , SSH and i am able to access with SSH , the web interface of the server comes up when i access with publicip:8083 only ------Just want to be sure I understand the...
View ArticleSRX 3600 and failed SPC
Hello, I'm completely new to this forum and Juniper newbie, so please bear with me.We have cluster of two SRX3600 with the following setup:1 x NPC card2 x SPC cards (Cp-Flow + Flow)1 x SRX3k 2x10GE XFP...
View ArticleJuniper srx / migrate ipsec vpn certificates
Hi all,i need to migrate a config from a srx 1400, to a srx 1500, however i don´t know how can i export and re-import the certificates used by IPSEC-VPN. How can i do this?
View ArticleRe: SRX 3600 and failed SPC
Hi Ravenant, Welcome to the J-Net community!!! It's unfortunate that your SPC has failed on the secondary node. Please find the answer to your questions below: My question is, are we losing anything?...
View ArticleRe: Dynamic VPN Configuration (SRX 340)
Good Morning, Please find attached the latest trace after the configuration changes you requested. Additionally I was not able to set the general-ikeid, checkout failed with the following information:...
View ArticleRe: SRX 3600 and failed SPC
If your SRX is not under a support contract so you don't qualify for a RMA there is a pretty large secondary market for used Juniper gear. A number of companies resell boards and devices where you...
View ArticleRe: SRX 3600 and failed SPC
Hello, Firstly welcome to the J-NET Security community and happy networking. With an SPC failed on the secondary node you would not have a functioning cluster. While the REs may be able to sync config...
View ArticleClik here to view.
Access WEB SERVER behind SRX300 from from INTERNET
How to access WEB Server (192.168.20.2) in Server zone from Internet.my Public IP is x.x.x.xWhat i need to configure in SRX?my diagram:appreciate!
View ArticleRe: Access WEB SERVER behind SRX300 from from INTERNET
You may configure destination nat or static nat to access the server from Internet. Please refer the KB, page no.8 for destination nat and page no.13 for static nat....
View ArticleL2 channel errors
Hi all, Topology briefly:Ex VC-----------------------ge-0/0/2 SRX----------------- 1-) Any idea why L2 channel errors occur?2-) How it is possible MTU is 1518 as in Junos environemnt it is 1514Byte by...
View Article