Re: test config terminal syntax error on }
When you have large sets of commands to load then using the file method rather than terminal is generally more reliable. Simply copy your plain text command file up to the device and load it from the...
View ArticleRe: SRX clustering over layer 2 network on CIsco 6500s
Hi, Please verify :* the status of all interfaces in the cluster : show chassis cluster interfaces* the state of exchange between both RE :** first clear counters : clear chassis cluster control-plane...
View ArticleIs a bridge possible between several virtual routers?
Hi, could someone help me? I do not clarify, I have looked up and down the documentation of bridge-domains, read whole "help topic bridge-domains bridge-domains" but it is not clear if I could do it or...
View ArticleRe: Is a bridge possible between several virtual routers?
Hi, A bridge is Layer 2 domain which bridges L2 interfaces with the option of creating a routed interface [irb] same as RVI interfaces. The irb interface can be homed under L3 virtual routers...
View ArticleRe: Is a bridge possible between several virtual routers?
Sorry for my English, what I mean is to create a bridge that contains all the interfaces that I want from virtual routers, thank you very much for your help
View Articleconfigure 802.1q trunk in SRX345
Hi, Guys, A Layer3 device "A" is connecting another Layer3 device "B". For A = Cisco Switch C3750 IP-base service, with the following configuration ( interface fa1/0/5 trunk port, and all IP addresses...
View ArticleRe: Is a bridge possible between several virtual routers?
A single bridge domain can only contain interfaces in the same routing instance. You will not be able to add interfaces from two different routing instances to the same bridge domain. You can use...
View ArticleRe: SNAT & DNAT Question
Hello, thanks for help. I turned the IP address definition end it works :-) set security nat static rule-set STATIC-NAT rule PI match destination-address 72.16.28.122/32 set security nat static...
View ArticleConfig on WAN
Hi we have a requirement Where Vlan x and y are extended from service provider on single WAN port. Vlan x is native vlan. On LAN, requirement is few ports are in private subnet and they are to be...
View ArticleRe: Config on WAN
You will need a trunk port facing this SP port with native vlan set on the appropriate one. Add all the LAN interfaces plus the LAN vlan from the SP to the same vlan Create the virtual interface either...
View ArticleRe: configure 802.1q trunk in SRX345
Hey Ben, Please run this command and confirm the global mode is switching: > show ethernet-switching global-information If so, then you have two options on the SRX assuming this topology:...
View ArticleRe: I doubt in configuring irb interfaces, why doesn't it ping me?
C0d3, Im not sure if I understand this: "they ask me is to bridge that interface to host several interfaces" When you say "bridge", you mean configure an interface with family bridge?Or do you mean to...
View ArticleADVPN. only one tunnel works
Hi all, I faced a very strange issue. I'm testing ADVPN but only one tunnel between spoke nad hub work at one moment. For example tuneel between spoke-1 works, then I enable tunnel on spoke-2 and it...
View ArticleSRX320 DHCP issue with Smartphones
HiI hope can someone help here as usual. I have a Juniper SRX 320 which is working fine with 2 DHCP server pools. I am getting IP on my laptops and also connected devices except the smartphones that we...
View ArticleVDSL2 Mini-PIM questions
1. Where can I find configuration details of the preconfigured VDSL2 profiles? The only information I can find is associated Data Rates. 2. Is there any way to restart the internet connection e.g. by...
View ArticleClik here to view.
Re: SRX320 DHCP issue with Smartphones
For a start I would highly recommend you to upgrade Junos to the recommended JTAC release. There were quite some bugs in the 15.1X49-D70 Junos version. Secondly you have configured dhcp both the old...
View ArticleRe: SRX320 DHCP issue with Smartphones
I had to mention that VLAN 8 and 9 are going to different SSIDs. Now, I cannot connect on any devices to Wifi on VLAN 8 however I can connect my laptops to wifi on VLAN 9. I am still experiencing the...
View ArticleRe: SRX320 DHCP issue with Smartphones
Sorry, I managed to clone the configuration wrongly - so the 192.168.8.0/24 was overwritten. Please try this instead: (and I will still recommend you to upgrade the Junos on your SRX320) delete access...
View ArticleRe: SRX320 DHCP issue with Smartphones
Your configuration resolved the DHCP issue and everything was working fine (internet access and DHCP). Then I decided to follow your recommendation and upgrade the JUNOS to JTAC recommended release.The...
View Article
