Re: Cluster failed over but want to move back
Sorry, my mistake relay, limit, and period options are added in Junos OS Release 17.4R1. So just to clarify I need to issue the following 'set chassis cluster redundancy-group 1 preempt'. Then I can...
View ArticleRe: Cluster failed over but want to move back
So just to clarify I need to issue the following 'set chassis cluster redundancy-group 1 preempt'. - Yes. Then I can reboot SRXB, if there are issues with reth0 on SRXA, SRB will take over one it...
View ArticleRe: Cluster failed over but want to move back
I have done command committed and reboot SRXB. Good news SRXA is working fine. But SRXB, once it came back up, did not take over. Current status below: show chassis cluster status Monitor Failure...
View ArticleRe: Cluster failed over but want to move back
I'm glad the SRX-A is working fine. The reason why SRX-B didn't take over as Primary is that the priority of SRX-B is 100 and SRX-A is 200 for RG-1. So, when you give preempt option for RG-1,...
View ArticleSRX5400 not support RPM by source and destination? Any other alternative?
Hi all, I'm already check on juniper pathfinder and it said the RPM not support on SRX5k series. So any other alternative that i can do RPM for failover scenario same like SRX1500?...
View ArticleRe: SRX5400 not support RPM by source and destination? Any other alternative?
Hi Kronicklez, Please be informed that RPM probes are supported with SRX Highend series devices but IP-monitoring with Route failover is not supported. As an alternative, you can use event-options to...
View ArticleRe: Database of names of static clients (hosts) of individual computers - SRX...
Hi,1. Is it possible to edit the hosts file (/etc/hosts) with J-WEB or prepare it on the PC in advance and upload it srx?2. Is another file editor (other than vi) available from the console or a file...
View ArticlevSRX web-authentication
Hello Experts, I'm stuck with configuring the web-authentication on vSRX. I've tried searching on youtube juniper channel but can't seem to find a tutorial on setting web-authentication for SRX hence...
View ArticleRe: vSRX web-authentication
This was the issue. [edit]root# show | compare [edit system services web-management http]- interface fxp0.0;+ interface [ fxp0.0 all ];[edit system services web-management https]- interface [ fxp0.0...
View ArticleRe: JUNOS PULSE vpn client version with Winows 10
In order to connect to an SRX's Dynamic VPN under Windows 10 1909 or newer you must use Juniper's specific version of the Pulse Secure Desktop 9.1R2.0. It contains an updated version of an embedded...
View ArticleRe: JUNOS PULSE vpn client version with Winows 10
Hi, thanks for the answer.Since I have purchased a second-hand SRX 240H (EOL) (soft version JUNOS 12.1X44-D40.2 built 08/28/2014 - I can't download any newer updates for free in any way?Because how do...
View ArticleRe: JUNOS PULSE vpn client version with Winows 10
Hi, thanks for the answer.Since I have purchased a second-hand SRX 240H (EOL) (soft version JUNOS 12.1X44-D40.2 built 08/28/2014 - I can't download any newer updates for free in any way?For now, I am...
View ArticleRe: SRX5400 not support RPM by source and destination? Any other alternative?
Hi Noobmaster, Is it anything i need to fine tune if i'm use FBF method based on url that u given? Also i'm use both default route? If i look config below it look like show to RPM? services {rpm...
View ArticleRe: FBR - PBR - SRX - Outbound L3 inbound L2 Flow and IRB interfaces
Hi Chaimae, Is you requirement is to route the traffic from irb.10 or irb.20 towards the external interface(let's say - ge-0/0/1) to the Internet in SRX? If that's the case then I would suggest you to...
View ArticleRe: JUNOS PULSE vpn client version with Winows 10
You can only download firmware if you have a service contract. The version you're running is no longer maintained and it is quite likely the issue affects that branch. I don't think you understand the...
View ArticleRe: SRX5400 not support RPM by source and destination? Any other alternative?
Hi Kronicklez, I think implementing FBF which includes Routing-Instance with event-options is a long shot. I never tried but think it should work. 1. Configuring Routing-Instance and separate default...
View ArticleVlan, not irb
I'm not up to speed on why exactly juniper has turned to the irb rather than the vlan object. At least that's what I'm seeing I think. My srx300 has an irb. My srx240b2 has the vlan. My question is...
View ArticleRe: Vlan, not irb
HIeugene1973 Greetings, you are seeing this difference because the SRX300 uses the enhanced layer 2 software and you SRX240 does not ELS devices use the "IRB interface" as the SVI, here is a list of...
View ArticleRe: Vlan, not irb
Hello Eugene, All the legacy SRX series devices with the Junos code 12.3X48 and below uses VLAN interface while the Next-Generation SRX series devices with Junos code 15.1X49 and above uses IRB...
View Article
