Use 12V adapter on SRX210HE2-POE if I'm not using POE?
I just bought an SRX210HE2-POE with 2 GB RAM to replace my SRX210B with 512 MB RAM, but I did not get an AC adapter for the new one. The new one requires 54V, 200 watts for POE. The old one was 12V, 60...
View ArticleRe: Simple nat not working
got it to work with this , is it possible to make it log failed attempts or smth like it ? I assume not source { rule-set nsw_srcnat { from zone Internal; to zone Internet; rule nsw-src-interface {...
View ArticleRe: Special SFP ... (40G->4x10G splitter cables)
Yes thanks , this was actually my original question with the same device from HP :http://www8.hp.com/lamerica_nsc_carib/en/products/oas/product-detail.html?oid=5223203
View ArticleRe: Certain sites being blocked.
Hi, This does not seem to be a FW issue. Rather a browser issue (Chrome). If you have another PC in the network please test again. If it works export the certificates from that machine and import the...
View ArticleRe: How to pass traffic through 2 VPNs
HI Can you share the proxy/encryption details on SRX2? Remember the traffic from LAN1 will first be decrypted and then encrypted again before being sent to LAN2. So settings must match this....
View ArticleRe: Simple nat not working
Hi egawd Glad that you got it working. W.r.t the logging of failed attempts, unfortunately policy logging will only capture initiation and closure of established sessions. One way to identify traffic...
View ArticleSRX240 upgrade release version 12.3X48-D35.7 got problem
After SRX240 upgrade to release version 12.3X48-D35.7 got problem when boot up complete got red led on status. How to fix it and how to downgade it to version 12.1
View ArticleRe: SRX240 upgrade release version 12.3X48-D35.7 got problem
Hi, Is something seen on the console ?is the SRX continuously rebooting ? Please use the TFTP or the USB install method mentioned in the following link to downgrade...
View Articlelog traffic for the default deny policy not working
HI Ive followed https://kb.juniper.net/InfoCenter/index?page=content&id=KB28109&actp=search and after generating some bad traffic : root@srx210> show log traffic-logroot@srx210> I have...
View ArticleRe: log traffic for the default deny policy not working
Can you collect "show security policies hit-count" couple of times and confirm there is traffic hitting deny policy?
View ArticleRe: Simple nat not working
Hi Anand That exactly what i did but its not logging , ive opened another thread for...
View ArticleRe: log traffic for the default deny policy not working
Hi Suraj Definitly something interresting is going on here . So lets say i ssh <ext ip> port 6543 ( which lead nowhere) root@srx210> show security policies hit-count Logical system:...
View ArticleSecurity log stream not working to Security Director
Hey guys, I am trying to utilize the security log stream functionality on an SRX220 branch device. Here is my config: root@SC-SRX220# show security log mode stream; source-address 10.6.255.1; stream...
View ArticleSRX 210 giving slow download speed but max upload speed
We have and SRX 210 in cluster connected to the EX switch that has ISP terminated on it. The interface ge0/0/0 connected to the ISP on the switch is set to auto/auto ge0/0/2 of the switch is connected...
View ArticleRe: Security log stream not working to Security Director
Hi, I would like to ask the following questions :- Is the vlan.255 interface in the default routing instance ?I do not see any issues with the log configuration on the SRX. Regards,Sahil...
View ArticleRe: Security log stream not working to Security Director
Yes, the vlan.255 interface is in the default routing isntance. I must have something wrong on the SD/Log Collector side. When I change the host IP to my machine, I see the syslog messages coming in....
View ArticleRe: SRX240 to Cisco IPsec site to site VPN - an example
Link is not working, please share it again, can it really be emulated?
View ArticleRe: SRX 210 giving slow download speed but max upload speed
Hi chillipepper, Can I ask how you measured the upload ? Do you have a policy on the Firewall permitting all outgoing traffic ?
View ArticleDHCPv6 client doesn't correct work
Hello.I have SRX220H, JUNOS 12.1X46-D55.3. My ISP uses DHCPv6 PD with DUID-LL.I cannot get IPv6.My config:# show interfaces ge-0/0/7 description ISP; unit 0 { family inet6 { dhcpv6-client { client-type...
View ArticleWeb Application slowness during access through Juniper
Our application on MVC.Net with angular and on database level we are using Sql server 2012 also we are using Entity Framework 6 as ORM tool. We are using database first approach.We have two dashbaord...
View Article