Hi,
I'm a newbie to Juniper and SRX. We have just setup a cluster with 2 Juniper SRX 220 devices and I’m just struggling to setup reth interfaces. The Juniper's have to 2 uplinks to a Cicso ASA. At the moment interface ge-0/0/0, ge-3/0/0 and ge-0/0/1, ge-/0/01 are connected to the ASA. I have setup a VLAN 's 192 and added the reth1 interface to this VLAN however I’m unable to ping the reth1 interface or the VLAN interface or the ASA interface at the other end. Please can someone advise what i have done wrong. Config below.
chassis {
cluster {
reth-count 2;
redundancy-group 0 {
node 0 priority 100;
node 1 priority 1;
}
redundancy-group 1 {
node 0 priority 100;
node 1 priority 1;
preempt;
interface-monitor {
ge-3/0/1 weight 255;
ge-0/0/1 weight 255;
}
}
}
}
interfaces {
interface-range interfaces-fwtransit {
member ge-0/0/0;
member ge-3/0/0;
unit 0 {
family ethernet-switching {
vlan {
members fwtransit;
}
}
}
}
ge-0/0/1 {
gigether-options {
redundant-parent reth1;
}
}
ge-0/0/3 {
unit 0 {
family inet {
address 10.100.0.252/24;
}
}
}
ge-3/0/1 {
gigether-options {
redundant-parent reth1;
}
}
fab0 {
fabric-options {
member-interfaces {
ge-0/0/5;
}
}
}
fab1 {
fabric-options {
member-interfaces {
ge-3/0/5;
}
}
}
reth0 {
vlan-tagging;
redundant-ether-options {
redundancy-group 1;
}
}
reth1 {
vlan-tagging;
redundant-ether-options {
redundancy-group 1;
}
unit 192 {
description untrust;
vlan-id 192;
family inet {
address 192.168.2.252/24;
}
}
}
vlan {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
unit 162 {
family inet {
address 172.31.254.3/24;
}
}
unit 192 {
family inet {
address 192.168.2.3/24;
}
}
}
}
routing-options {
static {
route 10.100.0.0/24 next-hop 10.100.0.1;
}
}
protocols {
stp;
}
security {
zones {
security-zone trust {
interfaces {
ge-0/0/3.0 {
host-inbound-traffic {
system-services {
ping;
https;
ssh;
}
}
}
}
}
security-zone untrust {
host-inbound-traffic {
system-services {
ping;
}
}
interfaces {
vlan.162;
vlan.192;
}
}
}
}
vlans {
fwtransit {
vlan-id 162;
l3-interface vlan.162;
}
web_dmz {
vlan-id 192;
l3-interface vlan.192;
}
}