Re: Query abaut 2 ISP actives with SNAT and DNAT rules and failover
Hello, Hope this article gives you some insight. https://kb.juniper.net/InfoCenter/index?page=content&id=KB24821&smlogin=true&actp=search Regards, Rushi
View ArticleRe: srx340 as a switch and gateway router
Hello Can you tell me which JUNOS version is running on SRX340? Regards, Rushi
View ArticleRe: srx340 as a switch and gateway router
Hello, In 15.1X49-D35, Ethernet Switching feature is not supported on SRX300, SRX320, SRX340 & SRX345 devices....
View ArticleRe: srx340 as a switch and gateway router
i've just read this: https://www.juniper.net/techpubs/en_US/junos15.1x49/topics/concept/security-layer2-bridging-transparent-mode-overview.html from the looks of things, I may be right about the new...
View ArticleSRX650 Source NAT in HA Cluster : "dip alloc failed"
Hi, In my HA Cluster SRX650, after 3 years, S-NAT doesn't work anymore since 1st May.My version since 2015-08-18 :node0: --------------------------------------------------------------------------...
View ArticleRe: srx340 as a switch and gateway router
rtilak wrote:Hello, In 15.1X49-D35, Ethernet Switching feature is not supported on SRX300, SRX320, SRX340 & SRX345 devices....
View ArticlevSRX 15.x JTAC Recommended Verion Boots very slowly in KVM on Ubuntu
Dear members; I have been facing issue with vSRX 15.x on ESXi 6 and now KVM.....vSRX takes a very long time to boot.... Pls someone help fix this issue? Waiting eagelry for your kind replies. Regards.
View ArticleRe: SRX650 Source NAT in HA Cluster : "dip alloc failed"
The behavior sounds like a bug and the description seems to match PR1036020. If you open a ticket with JTAC they could verify if you are hitting the PR. Or you could try the upgrade to the "Resolved...
View ArticleSRX 220 Reth interfaces and VLAN
Hi,I'm a newbie to Juniper and SRX. We have just setup a cluster with 2 Juniper SRX 220 devices and I’m just struggling to setup reth interfaces. The Juniper's have to 2 uplinks to a Cicso ASA. At the...
View ArticleRe: srx340 as a switch and gateway router
Hi, You will still be able to use it as the SRX240H2 (which is EoL, you can buy it from distributor stock as long as it last). 15.1X49-D40 re-adds support for ethernet...
View ArticleRe: SRX650 Source NAT in HA Cluster : "dip alloc failed"
Thanks Steeve. But I don't configured "nat persistent".JTAC Recommended release for this product is: 12.1X46-D40.2Update version12.1X47-D15is itstable for SRX650 ?
View ArticleDynamic VPN on Loopback Interface
Hi all. I had a public IP on loopback interface, and I configured dynamic VPN for clients from Internet to connect via this loopback gateway dyn-vpn-local-gw { ike-policy ike-dyn-vpn-policy; dynamic {...
View ArticleSRX Dynamic VPN access route
Hello!I configured dynamic-access vpn on SRX240 Cluster.Junos pulse connected but SRX not have route to client IP. And client not have access to resourse on/behind SRX-gateway. Session time remaining:...
View ArticleRe: Dynamic VPN on Loopback Interface
What version of code and what model of SRX do you have? 1454 is a "Failed to recieve HTTP response" error and the only time I've seen it was right after Pulse was sold by Juniper. Most version of...
View ArticleRe: Dynamic VPN on Loopback Interface
Hi. The version of Junos is 12.1X46-D40.2, and I'm using SRX650. So you mean, I should change the OS at SRX??
View ArticleGRE over IPsec on SRX5800 JUNOS 12.1
Hi All, I am doing the swap from ISG1000 to SRX5800. And now consider the migration of GRE over IPsec part. 1. Any limitation about GRE over IPsec on high end SRX JUNOS12.1? 2. After some days search,...
View ArticleRe: GRE over IPsec on SRX5800 JUNOS 12.1
Attached again my ISG config and only tunnle3 and 4 is active now. Thanks!
View Articlegr-0/0/0 or gre interface for GRE tunnel on SRX?
Hi All, For GRE tunnel, should I configure interface gr-0/0/0 or configure interface gre on SRX5800 JUNOS12.1? To use GRE tunnel, do I have to order special SPC card or any license? Currently on my...
View ArticleIPsec tunnel limitation on SRX high end with JUNOS 12.1
Hi Dear all, I need to do GRE over IPsec on SRX5800 with JUNOS12.1. (1) Is it supported? If not, which JUNOS version supports it? (2) Any limitation with IPsec or GRE or GRE over IPsec? I know that it...
View Article