Re: IPsec tunnel limitation on SRX high end with JUNOS 12.1
Hello, This feature support links says that SRX5800 supports GRE. http://www.juniper.net/documentation/en_US/junos12.1x44/topics/reference/general/security-feature-interface-support.html Following link...
View ArticleRe: gr-0/0/0 or gre interface for GRE tunnel on SRX?
Hello, You will need to use gr-x/y/z interface to configure GRE tunnels. 'gre' is an internally generated interface to handle gre traffic & is not configurable. Its use is elsewhere....
View ArticleClik here to view.
Re: Dynamic VPN on Loopback Interface
Hi. I already changed to another Junos OS, but the error is the same. Of course, the configuration was correct because I copied it from another customer, but this customer used physical interface in...
View ArticleSRX 3600 Memory Upgrade?
Hello, I'm trying to find information on whether or not it is possible to upgrade the memory in an SRX3600. We currently have 1024 MB and I was wondering if it's possible to upgrade to 2048MB or...
View ArticleRT_FLOW : APPTRACK_SESSION_CLOSE: How to disable
Hello, I am currently getting considerable volumes of logging with "RT_FLOW : APPTRACK_SESSION_CLOSE: AppTrack session closed idle Timeout" in my syslog files, but i can't seem to find how to disable...
View ArticleRe: srx340 as a switch and gateway router
To the point about SRX240H2 availability. As of 1st May the SRX100, 210, 220, 240H2, 650 all went end of sale.Starting release for the new SRX3xx and 1500 devices is 15.1...Depreciation of features...
View Articlehow to delete PPPoE interface or configuration
Hi everybody, How to delete PPPoE interface or configuration?
View ArticleRe: how to delete PPPoE interface or configuration
Hello, 'delete interface pp0' should do the trick. Regards, Rushi
View ArticleRe: how to delete PPPoE interface or configuration
Hi Rushi, thanks your help, but commit fail. root@PaleCondo# delete interfaces pp0[edit]root@PaleCondo# commit[edit system services dhcp propagate-ppp-settings] 'pp0.0' Interface must be definederror:...
View ArticleRe: how to delete PPPoE interface or configuration
Hello, Can you try: delete system services dhcp propagate-ppp-settingsordelete system services dhcp propagate-ppp-settings pp0 Regards, Rushi
View ArticleRe: how to delete PPPoE interface or configuration
Hi Rushi, Many thanks, it is OK , now i can delete pp0. RegardsLM
View ArticleRe: SRX 3600 Memory Upgrade?
Hello, Upgrading the memory (DRAM) of SRX3600 is not possible as far as I remember. Regards, Rushi
View ArticleRe: RT_FLOW : APPTRACK_SESSION_CLOSE: How to disable
Hello, Can you paste the output of command' show configuration security zones | match application-tracking'& 'show configuration | match application-tracking'? Regards, Rushi
View ArticleRe: SRX650 Source NAT in HA Cluster : "dip alloc failed"
Your configuration listed above does have thisset security nat source address-persistent The JTAC recomommended releases are just a general recomendation based on ticket activity. You may need to go...
View ArticleRe: Query abaut 2 ISP actives with SNAT and DNAT rules and failover
I could make a config with virtual routing for both ISP and forwarding instance for DMZ!! It work!Maybe someone needs, here it is:### Interfacesset interfaces ge-0/0/0 description "TASA"set interfaces...
View ArticleRe: RT_FLOW : APPTRACK_SESSION_CLOSE: How to disable
Hello, admin@srx100-1> show configuration security zones | match application-tracking inactive: application-tracking; inactive: application-tracking;admin@srx100-1> show configuration | match...
View ArticleRe: GRE over IPsec on SRX5800 JUNOS 12.1
This is KB19372 with the SRX example configuration for GRE over IPSEC http://kb.juniper.net/InfoCenter/index?page=content&id=KB19372 You will use the gr-0/0/0 interface for the GRE tunnel...
View ArticleRe: Dynamic VPN on Loopback Interface
Are you able to browse to the connect page from a web browser? If this is possible, I would suspect either the security policies for the loopback zone are not complete or the host inbound serivces...
View ArticleRe: RT_FLOW : APPTRACK_SESSION_CLOSE: How to disable
Hello, For which traffic you are getting 'RT_FLOW : APPTRACK_SESSION_CLOSE' logs?Output of the log messages would be good if available. Also can you attach 'request support information' output?...
View ArticleRe: RT_FLOW : APPTRACK_SESSION_CLOSE: How to disable
RT_FLOW : APPTRACK_SESSION_VOL_UPDATE: AppTrack volume update: 192.168.1.10/60975->54.68.166.164/443 junos-https UNKNOWN UNKNOWN [REDACTED}/29978->54.68.166.164/443 nsw-src-interface None 6...
View Article