Quantcast
Channel: All SRX Services Gateway posts
Viewing all articles
Browse latest Browse all 17645

Re: Juniper srx-100-b doesn't boot

$
0
0

If you have no output on the console and no pre boot prompt then there is likely no way to access the flash directly.  This model the flash is soldered onto the main board.

 

You could try to make a bootable USB drive on another SRX100 then boot the SRX here from that drive.  Then you might be able to use snapshot to recover files.  But I'm not sure that would work given you erased very low level files on the system.

 

maybe the root prompt from the USB boot would give the necessary access to copy over the files.


Viewing all articles
Browse latest Browse all 17645

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>