Hi,
I have a question about Juniper SRX firewall configuration,
Running 11.4R7
My Q, is about routing table used while processing traffic passing through the firewall,
I have routing configuration part of the routing-instances definition, and it looks like
set routing-instances Main-VR instance-type virtual-router
set routing-instances Main-VR interface reth0.0
set routing-instances Main-VR routing-options static route 10.80.90.0/27 next-hop 10.80.90.40
Then i could find another routing definition as
routing-options static route 10.62.170.190/32 next-hop 10.80.93.1
routing-options static route 10.62.170.0/24 next-hop 10.80.93.1
routing-options static route 10.61.105.0/26 next-hop 10.80.93.1
routing-options static route 10.66.65.103/32 next-hop 10.80.93.1
What’s the difference between the two definitions?
Are both active, i mean checked while traffic processing taking place?
Or I could remove one of them