Clik here to view.
Re: SRX240 Dynamic Vpn with LDAP
Hi Gourami, I was wrong in my previous comment when I double checked it you're correct you do have to add each user seperately. A way around this would be to add all the users you want to grant remote...
View ArticleRe: SRX210 load-balancing
Okay so if I understand well, it's simply a firewall (with router capabilities) so when is session is initiated, it won't change. So what is the load-balance per-packet for in routing-option?
View ArticleRe: Accidental Power Loss - Juniper SRX 100H
Thank you spuluka. Forgive my inexperience, is the Snapshot repair accomplished thru the GUI or CLI, thank you.
View ArticleRe: Accidental Power Loss - Juniper SRX 100H
I ran the System Snapshot to an external USB drive.
View ArticleClik here to view.
Re: Recommendations for UTM on SRX240
lol, the main recomendation is don't use srx for utm. It's just money for nothing to buy utm licenses.
View ArticleRe: TCP Port QOS priority
Thats not exactly what I was looking for. I am needing to prioritize TCP port 491 incoming from the internet. It is a web based LOB.
View ArticleRe: SRX240 Dynamic Vpn with LDAP
Hi elkadiki, I looked the link you provided and it's for radius not ldap, not sure if radius setup would be similar with ldap. I found another thread trying put the users into a group but he ran into...
View ArticleRe: L2TP/IPSEC VPN behind static NAT not working
Got similar problem with my own SRX220H , static NAT to server in trust zone. running SoftEther VPN server running L2TP over IPSec. Its running all great with SSG5 with MIP as well . But once i swap...
View ArticleRe: Accidental Power Loss - Juniper SRX 100H
It looks like the command for the alternate partition is not available inthe web interface. You can run this only on the CLI request system snapshot slice alternate This repairs the alternate boot...
View ArticleRe: Accidental Power Loss - Juniper SRX 100H
Thank you so much for your help. I issued the command thru CLI, I'm assuming I need to reboot to take effect. I'm going to do that first thing in the morning. The company is so busy that although are...
View ArticleSRX firewall routing configuration
Hi,I have a question about Juniper SRX firewall configuration,Running 11.4R7My Q, is about routing table used while processing traffic passing through the firewall, I have routing configuration part of...
View ArticleRe: Power redundancy on SRX3600
Hi Just another point I thought it worth mentioning while looking at this article. The SRX3600s need only 2 power supplies to fully power the chassis. So, although there is no 2+2 (N+N) redundancy per...
View ArticleRe: L2TP/IPSEC VPN behind static NAT not working
Hello there, ROL801 wrote: Please advise what i need to change.Swap the cable back? :-)On more serious note - in what zone is Your st0.* interface - assuming You use route-based VPN?Do You have a...
View Articlewhether redundant-parent interface could be use in a situation without...
hello everyone , whether redundant-parent interface could be use in a situation without deploying chassis cluster or not . is there anyone could you me with that ?
View ArticleRe: whether redundant-parent interface could be use in a situation without...
Hi caulfiedd@live.cn, Though you can configure a reth interfaceon a standalone device and it would not make much sense to create tthe same as it would not exactly serve the purpose if the device itself...
View ArticleRe: SRX firewall routing configuration
Hi Arouba, In the following configuration;Then i could find another routing definition as routing-options static route 10.62.170.190/32 next-hop 10.80.93.1 >> 1routing-options static route...
View ArticleRe: whether redundant-parent interface could be use in a situation without...
thanks for you reply .so you means that even without associated with redundant , redundant-parent interface still can be up and will pass traffic if at least one child interface is up.right ?
View ArticleRe: system alarm 'autorecovery information needs to be saved'
This just helped me as well, thank you.
View Article