Hello I am trying to make the below setup, by using the VDSL2 pim instead of SHDSL one, without using username or password for authentication as there will be point to point IP from the PE to the juniper.
The Sub interface configuration from the PE side and the DSLAM port pvc is configured with VLAN 111 untagged with VPI/VCI 0/35
interface GigabitEthernet0/0/1.111
encapsulation dot1Q 111
ip address 10.0.0.1 255.255.255.252
i need an advice for the juniper SRX configuration
