Re: Capture Traffic on USB Drive or Mount NFS ?
Hello, Symbolic link doesn't work.All symbolic link delete automatically when capture start... There isno waytocatchover several hoursandthereforehave significantPCAPfiles? Thanks,Julien
View ArticleRe: Capture Traffic on USB Drive or Mount NFS ?
I didnt have any issue with a symbolic link being deleted when using a single file on an SRX210 with the capture linked to a USB drive, I was unable to get it to work with multiple files as you say,...
View ArticleRe: Capture Traffic on USB Drive or Mount NFS ?
How can I do an enhancement request ? I seethat there is nomount pointdirectly to "/var/tmp" root@SRX01% mount | grep var /dev/bo0s3f on /cf/var (ufs, local, noatime) /cf/var/jail on /jail/var (nullfs,...
View ArticleRe: Capture Traffic on USB Drive or Mount NFS ?
With regards to an enhancement request, this can be discussed with your Juniper Account Manager. They should be able to raise a request on your behalf, or at least point you in the right direction....
View ArticleRe: External Users Can't Reach Public Addressed Devices in DMZ from Untrusted...
Flow Session: --- JUNOS 12.1X46-D40.2 built 2015-09-26 02:25:28 UTCadmin@srx100> ...ion destination-prefix X.X.X.210Total sessions: 0admin@srx100> ...ion destination-prefix X.X.X.211Total...
View ArticleRe: External Users Can't Reach Public Addressed Devices in DMZ from Untrusted...
I will try to get more detailed info with a traceoption later today. I also noticed that servers with a Public IP on their NIC in the DMZ don't have internet access but can reach the default gateway...
View ArticleVPN Using Certs: Possible to Only Provide Cert-Chain for Local-Certs?
Hi, We are currently using security certs to create site-to-site VPNs. We provide local-cert in PKI config and also the ca-certificates. Is it possible to drop the latter and only provide...
View ArticleRe: snmp no respond on SRX 1400 when use snmpwalk command on snmp server
is there any one can help with it
View ArticleClik here to view.
Screen logs
Dear friends how should i allow to log screen rules. now it is always seems empty. Thanks
View ArticleRe: Screen logs
Hi,AFAIK, those logs needs to be send to syslog server , such as STRM , they will show as RT_IDS logs /errors ..
View ArticleRe: Juniper to Cisco OSPF over IPsec
Hi Alex, Thanks for the info, I found a website that has any example of this. I'm going to try it out hopefully it will work. link: Overlaid - Juniper-Cisco GRE IPsec with...
View ArticleDual ISP Failover Configuration (default route not working )
Hi dear AllWe have two srx240 which is configured in HA ClusterI configure two interfaces and two ISP, for isp failover but when first ISP was down second ISP didnot work Isp1 zone is ineternet1Isp2...
View ArticleRe: Screen logs
Dear SPDNet, To enable logging of events related to screens protection, you can apply the following command ( assuming you are logging to a local file called messages ) : #set system syslog file...
View ArticleBoot halts at Time and ticks drifted too much
Hello forum! When booting my SRX240H2 i stops for a looong time the following message: "Time and ticks drifted too much, resetting synchronization..." After 5min, give and take, it continues to boot. I...
View Articleunstable connection to leased IPVPN location after switching to SRX
Hi guys, we have this irritating issue that I have been strugling with before, going back to Sonicwall helped last time. sonicwall is at its last breath so now we need to implement SRX solution. this...
View ArticleRe: Boot halts at Time and ticks drifted too much
have you tried to configuring time by NTP ?
View ArticleDual fabric links on SRX5800
Hello, I am new to the Juniper line of products and I was wondering if you can create aggregated fabric link (2 interface on the primary chassis and 2 on the backup chassis). I did set up the...
View ArticleQoS Default Behavior
I could use some clarification on some QoS behavior. If a packet comes in to a device, should it automatically show up in the EF queue? Thanks.
View ArticleClik here to view.
Re: QoS Default Behavior
I could use some clarification on some QoS behavior. If a packet comes in to a device, should it automatically show up in the EF queue? NO see the COS default behaviour pic below the default BA...
View ArticleRe: unstable connection to leased IPVPN location after switching to SRX
Hello,Two questions :1/ what is the smallest MTU along the path? Can You please lower the TCP MSS on the SRX and re-test: security { flow { tcp-mss { all-tcp { mss 1300; } }}}}1300 is pretty much the...
View Article