Quantcast
Channel: All SRX Services Gateway posts
Browsing all 17645 articles
Browse latest View live

Re: SRX IKE Responder

Hi there, Please share me your personal email. I am working on a similar project and would like to know your challanges etc.

View Article


Re: Avaya IP Phone Behind SRX cannot connect to it's Call Manager

Thanks for this.... it helped me get to the right direction. First I had to enable the IKE-ESP ALG, but this alone did not get things working even though my policy was set to match any application....

View Article


Re: SRX1500 IPS failure

Is your system clock on time? Such a time-based license may show as invalid if your clock is set to a time outside of the validity period.

View Article

SRX-100 and Vonage, one way audio

We have wonderful Vonage in one of our remote sites, and the inbound audio is not heard. Can someone show me the commands for the following from Vonage; Set UDP-ANY timeout to 10 minutes, disable UDP...

View Article

Re: SRX240H2 static route works only one way

spuluka wrote: Basically, you have two choices: 1-Connect one router to the LAN2-Modify all the hosts in the LAN with static routes Hi Spuluka,Thank you for the suggestions.  I acually is using the...

View Article


Re: SRX to SSG site to site VPN (multiple remote subnets)

Yes, I found One way tunnel is formed by using Policy based tunnel. SRX     < tunnel>    Netscreen<------------------------One way traffic via tunnelSRX traffic go to Internet I reconfigure it...

View Article

Re: SRX to SSG site to site VPN (multiple remote subnets)

Hello, Can you provide complete configuration on SSG & SRX in its present form. Regards, Rushi

View Article

Re: SRX to SSG site to site VPN (multiple remote subnets)

Hello, I changed the firewall config to route based at this moment,so that traffic can go via both sides. You can refer to LAX_VPN in HKGFWL0001 file Thanks

View Article


Re: SRX to SSG site to site VPN (multiple remote subnets)

Hello,To make VPNs to work, do following things on SRX if you want to keep route-based VPN.-> Create two tunnel interfaces & two VPNs as below: (with policy based VPN, only one VPN is required...

View Article


Re: SRX to SSG site to site VPN (multiple remote subnets)

Thanks mate. I tried this configuration before but I have no idea why it didn't work.

View Article

Vlan mapping

Hello; I have a very simple question related to switching mode of a SRX. I have two interfaces of a SRX220h configured as trunks dot1q. I need to take 2 vlans of one of this trunks and change the tag,...

View Article

Re: Vlan mapping

Hi,  Would that be  possible with vlan-rewrite:https://kb.juniper.net/InfoCenter/index?page=content&id=KB23737&smlogin=true&actp=search Cheers,Ashvin

View Article

Re: Vlan mapping

Hello Ashvino, I had saw this solution but when i tried, got an error. I found how to fix the error so i'm  trying again. The problem was that the device was working in route mode, so i had to change...

View Article


Re: MSRPC ALG issue

Since this is the first hit (or at least top 3) on google when you search "msrpc alg juniper srx"I will just add a note here:Every couple monthes FTP ALG would go down for us here.  For some ftp...

View Article

Does Juniper support UPNP or NAT-PMP ?

Hi, We have a client that uses apple devices in their business and a lot of their networking between apps uses universal plug and play (upnp) or NAT-PMP. I know juniper doesn't support upnp, but does...

View Article


Re: Does Juniper support UPNP or NAT-PMP ?

Juniper and most commercial grade firewalls do not support it. However the NAT-PMP is supported bis Named differently- You would use STUN protocol and persistent-nat.  junos-stun and junos-persistent-nat 

View Article

Re: SRX1500 IPS failure

Does the license actually show up as installed? Remove the IDP license then try using the trial version and see if that works.

View Article


Re: Does Juniper support UPNP or NAT-PMP ?

Hi, Thanks, you're spot on ! I found these juniper articles after searching for STUN protocol and persistent NAT:...

View Article

how to disable NetBIOS via DHCP

we had a requirement to disable NetBIOS on our Windows clients at the branch offices. we have DHCP services running on the SRXes directly. since the documentation for this small task is very thin, I...

View Article

Re: SRX - NTP Server

Very helpful

View Article
Browsing all 17645 articles
Browse latest View live