Re: Brand new SRX300 high CPU usage
This is the same as mine, but I have traffic passing through the device.
View ArticleJuniper SRX220H device returns to factory
Hello comunity I need your help please I have a device 220H juniper srx which introduced two ultimameente a factory reset, I must return a car. I find what the problem is if I can guide please.
View ArticleRe: SRX300 series VLAN interface
Hi timamplex, A bit more detail, please - otherwise it's difficult to help you. What do you mean with "fails out"? Does it commit or does it not work after commit? periodic instability? Please provide...
View ArticleRe: Brand new SRX300 high CPU usage
You have it in production? I am wondering if I am actually going to perservere with it and possibly just get them RMA'd and get another model if juniper cant sort it out. the unit is going to replace...
View ArticleRe: Juniper SRX220H device returns to factory
Its not very clear, can you please share some more details.
View ArticleRe: Brand new SRX300 high CPU usage
Hi, This is a known issue and is actively being investigated by Engineering team for a fix. Regards,Sahil Sharma---------------------------------------------------Please mark my solution as accepted if...
View ArticleRe: TCP DUP messages
Hi, More details about this command are availabel at the following link...
View ArticleRe: Brand new SRX300 high CPU usage
What do I do in the meantime? I have 3 devices to rollout. Do I send them back as DOA and purchase new ones once a fixed ? Is it just the 300? Or can i use any new 3xx devices??Cheers,Aaron Sent from...
View ArticleRe: Brand new SRX300 high CPU usage
Hi Aaron, This is a software issue and has nothing to do with the hardware of the SRX3xx devices. A software upgrade to the resolved version would fix this. I would let you know the fixed software...
View ArticleSRX site-to-site vpn slow in one direction
Ive experienced this on a couple of SRX pairs. IPSEC vpn between two SRX240 running 12.1 firmware. The medium is 100mb/s internet. If i temporarily allow unencrypted comms between them and do some ftp...
View ArticleRe: Brand new SRX300 high CPU usage
Hi Aaron, As per the latest update, the engineering team is working with the hardware team to fix this. The fix should be in software code only. I would keep you posted. Regards,Sahil...
View ArticleRe: Brand new SRX300 high CPU usage
Thanks for the update... I have logged a P2 case for this (2016-0928-1022), could you perhaps update the case owner? Is there going to be an alert or similar sent out about this as lets face it, from...
View ArticleSRX policies hit-count
Hi everybody, Can I ask what exacty is the number in "show security policies hit-count" is? Packets or session creations or something? Thank you.
View ArticleRe: SRX policies hit-count
Hi, The policy hit-count shouws the number of hits to that policy. A policy would be hit only for the fisrt path when the session is being created. If the packets match an existing session on the SRX,...
View ArticleRe: Brand new SRX300 high CPU usage
Aaron, I would update the case owner about the PRs.Not sure if every 3xx device is affected by this, howeverm i have seen quite a few devices with such symptoms.The case owner would notify you when the...
View ArticleProxy-arp on redundancy interface
Hello I'm running SRX1400 cluster with Junos 12.1X46-D30.2.I'm trying to implement a possibility to connect my infrastructure servers using unnumbered interface with /24 network on lo0 interface. At...
View ArticleClik here to view.
Re: Proxy-arp on redundancy interface
Hello, Yes,, This feature to configure SRX fgor proxy arp has always been there. Please check the below link for configuring proxy-arp on SRX....
View ArticleRe: Brand new SRX300 high CPU usage
I have similiar issue on my SRX300 which is running D60 software. I don't have high CPU utilization but my control plane is using 95 percent of memory:Routing Engine status: Temperature 42 degrees C /...
View Articlecreate cluster match the license between 2 srx240 , I can't delete one license.
one of the prerequisites from [KB15504] to create a cluster is to match the license , I have one srx0 withshow system license usage Licenses Licenses Licenses Expiry Feature name used installed needed...
View ArticleSCTP NAT
Hi, Is SCTP NAT supported on SRX and does it do the job sucsessfully? Can it also be implimented on a MX router? Thanks
View Article