Port mirroing in srx3600
Hi All, I have some problem in SRX3600 with port mirroring. Can i do port mirroring from fibre(Xe-0/0/1) port to copper (G-0/0/7)? If so how can i do that? In reth0 i have a more vlan from different...
View ArticleRe: create cluster match the license between 2 srx240 , I can't delete one...
You need to delete the license identifier. If you do a "show system license" the bottom section will show the actual licence keys installed. Look for the one that is for the AX and use the license...
View ArticleRe: Port mirroing in srx3600
You should be able to do that, however, you can experience packet loss, as xe is a 10g interface and ge is only 1g.
View ArticleRe: Port mirroing in srx3600
Thanks for your reply. Xe is a 10G and ge is a 1G but there is not a lot of traffic going in Xe. How can i configure the interface of Xe for port mirroring?
View ArticleRe: Juniper SRX220H device returns to factory
hello, my problem is that srx220h device returns to its factory settings, to last 4 times this week.
View ArticleRe: SCTP NAT
I'm not an SME here but I did find this link in ourTechLibrary: http://www.juniper.net/documentation/en_US/junos12.3x48/topics/concept/gprs-sctp-configuration-overview.html -- perhaps this will get you...
View ArticleRe: Port mirroing in srx3600
Hi, Please go throug the following link for configuring port mirroring :-https://kb.juniper.net/InfoCenter/index?page=content&id=KB21842&actp=search Please take note of the Limitation #8 :-...
View ArticleRe: SRX policies hit-count
Hi Sahil, Thanks for the reply. I read the link before but it is not so clear what the hit number is. Best Regards,Duc Hoang
View ArticleRe: SRX Cluster + OSPF graceful restart takes to long
Yes: squeeb@fw1-a# show protocols ospf graceful-restart { restart-duration 120; notify-duration 30; } area 0.0.0.0 { interface lo0.0 { passive; } interface reth1.0 { interface-type p2p; } } interface...
View ArticleRe: SRX Cluster + OSPF graceful restart takes to long
This is the issue, a long dead timer can lead to unacceptable downtime if the upstream router decides to quit. I'd like to have the best of both worlds really. Using BFD for quick failure detection...
View ArticleRe: Proxy-arp on redundancy interface
Unfortunately the link you've provided doesn't help (if I getting it right). I'll attach a file with configuration I'm trying to run. I've tried to apply it on my cluster, but servers wasn't able to...
View ArticleRe: Brand new SRX300 high CPU usage
Thanks for that... is there any mitigation or workarounds that you know of as I can't imagine EVERY unit doing it? What is the factory default configuration doing that some other customers...
View ArticleReachability Issues With SRX Routers and OSPF
Hey All, I'm working on a physical lab with 3x SRX210s, 3 Cisco ME3400's, and a Cisco 1841 in training myself up when it comes to multi-area OSPF LSA propagation. I've turned up area 0 (which consists...
View ArticleCustom user permissions
Hi, I want to create a custom user class that has the ability to view and modify the configuration with the exception of root access/password and other user's access/password. Is there a way to do...
View ArticleHigh system CPU usage when using screen to limit udp flood
Hi, We are using SRX240H2 as our GW. Today just for testing purposes I've set the udp flood threshold for 3000 pps. For our network usage is is OK to have even 25 kpps of UDP traffic, but that not a...
View ArticleRe: High system CPU usage when using screen to limit udp flood
Hi, The RT logs which the SRX had to write to a local file are actually traffic logs. By default, the SRX 240 is in even mode for traffic logs, which means that all the traffic logs ( and system logs)...
View ArticleRe: Reachability Issues With SRX Routers and OSPF
Can you try adding permit-all policy for testing and check the behavior. set security policies default-policy permit-allcommit
View ArticleRe: Proxy-arp on redundancy interface
Can you share the error you are getting. I am able to configure the same on cluster ruiing 12.1X46-D25.7 {primary:node0}root> show configuration | display set | match reth2 set interfaces reth2...
View ArticleRe: SRX Cluster + OSPF graceful restart takes to long
l would suggest you opening a case with JTAC to get this behavior investigated.
View Article