Re: SRX1500: IRB interfaces and Ping issues between directly connected...
Did you try pings sourcing the interface in question? I'm assuming if you show route, you see the correct entries in the table?
View ArticleRe: SRX1500: IRB interfaces and Ping issues between directly connected...
i would still like to see output from "show route", "show arp no-resolve", "show ethernet-switching table" after trying to ping to see if layer2, arp and mac learning actually works. Extra tests:...
View ArticleRe: Unable to browse website after deploying Juniper SRX220H as Transparent Mode
also - just a curiosity on the topology is there a reason you have the srx behind the fortinet? if the purpose for the srx is purely idp it would make sense to stick it on the exterior as screens are...
View ArticleRe: SRX1500: IRB interfaces and Ping issues between directly connected...
Hi Victor and Jonas, Below is requested info "sh arp no-resolve" , "sh route" , "sh ethernet-switching table" SRX1:root> show arp MAC Address Address Name Interface Flagsd4:04:ff:e6:84:f0 10.10.12.1...
View ArticleRe: Unable to browse website after deploying Juniper SRX220H as Transparent Mode
We believe having multiple layer of security device will ensure better traffic security. Hence we setup as a Layer 2 Cluster Juniper SRX with IDP only and Fortinet Firewall with Layer 3 security with...
View ArticleRe: Unable to browse website after deploying Juniper SRX220H as Transparent Mode
I have tried to place https policy on top to bypass the scan. But I still cannot browse the website properly. Anyway you can aid me in fixing this? Thanks!!
View ArticleSRX 240 VPLS Configuration problems
I amtrying to set up VPLS between 2 SRX240 in our lab at the Academy. We have tried several configuration ideas from documentation on VPLS on J/SRX series (security devices) and nothing works so far....
View ArticleRe: Unable to browse website after deploying Juniper SRX220H as Transparent Mode
I think then we need to verify the physical path and any potential interface issues. For the two interfaces you are using as the pass through look at the extensive output and see if there are any of...
View ArticleRe: SRX 240 VPLS Configuration problems
Hi, Just wondering if you need to allow host-inbound-protocols on the zones/interfaces.Will need IGP, RSVP & BGP to be up for signalling. Cheers,Ashvin
View ArticleRe: export network between routing instances
Since your traffic is coming in the untrust are you sure the return route from the trust vr to the accessing host is back to the untrust vr?what is in the active route table for trust vr on the outside...
View ArticleRe: SRX 240 VPLS Configuration problems
Have you set the devices in packet mode? https://kb.juniper.net/InfoCenter/index?page=content&id=KB30461&smlogin=true&actp=searchOr if you need to use some of the security functions -...
View ArticleRe: export network between routing instances
Hi Actually there is a default route on the Trust Vr is the Untrust Vr. I can ping the server from the public Internet, but the application itself uses https to access the server and I dont even see...
View ArticleSurfControl HTTPS is not working
Mahmoud Baroudi wrote:Hi Everybody Today i configured the Enhanced Web filtering on SRX-100 (version 12.1R5.5) after installing a license for it,everything configured right, but unfortunatly its not...
View ArticleRe: SRX1500: IRB interfaces and Ping issues between directly connected...
There are actually a few PR's associated with IRBs on 1500/300s that are ongoing. Which version are you running today? 15.1X49-D60 has fixes for the vast majority of them.
View ArticleRe: SRX1500 SSL Proxy Signing hash
So you were wise to not waste your time - took a few days and escalation to find out sha256 wont be supported till mid17 - so at this point if its a non ie only environment your stuck with not...
View ArticleRe: SRX1500: IRB interfaces and Ping issues between directly connected...
Hi , I am running JUNOS Software Release [15.1X49-D60.7] thanks
View ArticleRe: SRX1500: IRB interfaces and Ping issues between directly connected...
Did you just performed an upgrade to 15.1X49-D60 from some other version? and did you do an additional reboot after upgrade to fix the l2-switching mode ?If so, can you enable pcap on irb interface and...
View ArticleRe: Unable to browse website after deploying Juniper SRX220H as Transparent Mode
I have checked the duplex and speed mode. Here are the following ge-0/0/0: Full duplex, speed 100 ge-0/0/1: Full duplex, speed 1000ge-3/0/0: Full duplex, speed 100ge-3/0/1: Full duplex, speed 1000...
View ArticleRe: Unable to browse website after deploying Juniper SRX220H as Transparent Mode
can you try pinging 8.8.8.8 with a size of 1400 bytes or higher? Please try setting mss to a lower value like 1350
View Article