Re: QOS question - phsyical port speed override?
When you set the speed manuallly, we need to turn-off auto-negotiation . I see its working after turning off auto-negotiation.[edit]root@SRX2004# set interfaces ge-0/0/0 speed 100m[edit]root@SRX2004#...
View ArticleRe: SRX 240 VPLS Configuration problems
Try adding below statement to both srx devices. This is to disable automatic path computation. We dont see any parameters defined for path selection on your configuration and the feature is turned on...
View ArticleRe: ARP Request Being Ignored
AFAIK, this is something similar to rfc1027 and Juniper supports this. I would recommend you opening a JTAC ticket to confirm this.
View ArticleRe: SurfControl HTTPS is not working
12.1R5.5 is very very old and end of life version.Please upgrade to any latest/supported versions and check the behavior
View ArticleCHASSISD_FASIC_HSL_ERROR
SRX 3600 is showing following in log chassidCHASSISD_FASIC_HSL_ERROR: Fchip (CB 0, ID 0): link 1 failed because of crc errorsCHASSISD_FASIC_HSL_ERROR: Fchip (CB 0, ID 0): link 2 failed because of crc...
View ArticleRe: CHASSISD_FASIC_HSL_ERROR
Can you share below outputs root@SRX> show chassis alarmsroot@SRX> show chassis fpc pic-status
View ArticleRe: QOS question - phsyical port speed override?
hello I tried this on my lab the uplink from my router to switch, I set no auto and 10m and it does not work, i even bounced the port however i dont that is a solution. for one i would have to...
View ArticleRe: SRX300 series VLAN interface
Hi jonashauge, Will it work on vSRX 15.1X49-D50.3? There is no chance to configure "global-mode switching" on vSRX
View ArticleRe: SRX1500: IRB interfaces and Ping issues between directly connected...
Thanks for everyones approach / help , looks like i found the issue. Its the irb interfaces which dont act "normally"( dont ping ) when all the referenced interfaces in a aggregated ethernet group are...
View ArticleRe: SRX1500: IRB interfaces and Ping issues between directly connected...
Hi. Can you test the following behaviour :- Connect both the interfaces physically and it should start working.Now remove one of the interfaces, does it continue to work or does it stop working again ?...
View ArticleRe: ARP Request Being Ignored
Thanks for the reply.The SRX does indeed support Proxy ARP, but this isn't a Proxy ARP situation (from the prespective of the SRX). Proxy ARP is when a router / firewall needs to respond to ARP...
View ArticleRe: Unable to browse website after deploying Juniper SRX220H as Transparent Mode
Between isp and fortinet. Reason being is if all you are using the srx for is screens, you will reduce cpu usage on. The fortinet by not scqnnning traffic the srx will drop......
View ArticleClik here to view.
SRX Chassis Cluster With BGP Router for Dual Internet
Hi, I have Two Sites A & B connected with core switches via Layer2 having SRX Cluster (Active / Passive; Which needs to be established via same ethernet switches). Now new requirement is to put a...
View ArticleRe: SRX1500: IRB interfaces and Ping issues between directly connected...
Hi Sahil , it works for some time after the interface is removed physically but , i kind of checked it after few hrs and the pings stopped . Dont exactly know after how long though. thanks
View ArticleRe: SRX300 series VLAN interface
vSRX doesn't support switching as this is handled by the hypervisor (ESX, KVM etc.) so the global-mode switching command only makes sense on the physical devices (SRX300 series, SRX550M and SRX1500).
View ArticleRe: SRX1500: IRB interfaces and Ping issues between directly connected...
Hi, I have come across a similar behaviour which is being tracked as a bug. It should be fixed in the D70 release. Regards,Sahil Sharma---------------------------------------------------Please mark my...
View ArticleVSRX Evaluation License
Hello everyone, I'm new to Juniper Neyworks, Begining my first lab on vSRX.I'm trying to test idp functionality on my vSRX , have installed an evaluation license , But I think something is going wrong...
View ArticleDynamic VPN client can only access some protected resources?
Hi all, I've got a 2 site setup with SRX240s in each site, and an IPSEC VPN tunnel between them. I've also set up Dynamic VPN access via Internet to the main site (PHV). Dyn-VPN Clients can...
View Article