Re: Help configuring VLANs
Thank you for your reply Abed AL-R - I'll try out this config today! Question. In these examples, how are IPs dynamically assigned for each VLAN? If I have, as in my current config, a dhcp pool for...
View ArticleRe: Help configuring VLANs
For this type of configuration you'll need to configure DHCP pool in SRX for every VLAN in order to assign IPs dynamically to devices .Let me give you an example of how to configure and assign each...
View ArticleRe: Help configuring VLANs
Thanks again Abed. I'm working through the configuration now - I notice these CLI commands don't create an entry in the vlans section. Is this necessary? Would I also need to add each VLAN interface...
View ArticleSRX ALG questions
Got a little bit confused about ALGs. Could somebody clarify? 1) What is the difference between <alg> and <application-protocol> in configuration? ch@test# set applications application test...
View ArticleRe: SRX ALG questions
Application - This is a defined set of protocol and port that are used by an application. i.e. junos-dns-udp - UDP port 53 using protocol and destination port as the main terms. ALG - Application Layer...
View ArticleSRX1500 : VLANs without tags ( van
Hi I want to connect 4 servers to 4 ports on the SRX1500 and each port is assigned to VLAN with vlan-id "none" and a irb interface with a subnet to assign IPs to the servers. will the setup work in...
View ArticleRe: Dynamic VPN on a SRX650 chassis cluster with 12.3x48
Hi Nadeem –I am not sure if anyone has gotten back to you. Thank you for bringing this to our attention: we always value feedback from our customers. We have determined that DynVPN does support SRX...
View Articleviewing unfiltered bgp routes?
On an SRX running 12.3, what is the command to view raw unfiltered BPG routes as advertised by our peers? "show route protocol bgp" only gives you the table entries after route filtering has been...
View ArticleRe: viewing unfiltered bgp routes?
show route receive-protocol bgp <neighbor-address> is the command to view raw unfiltered BPG routes as advertised by our peersEg show route receive-protocol bgp 1.1.1.1 (here 1.1.1.1 is the bgp...
View ArticleRe: config VPN on SRX failed
Dear Abed, Thanks you, I change and install new version of Pulse and VPN has successful, Many Thanks
View ArticleRe: viewing unfiltered bgp routes?
Thanks for the prompt reply. Thats exactly what i needed. One more question - several routes are flagged as 'hidden' and are therefore not added to the local table. Why might this be?
View ArticleRe: Help configuring VLANs
Hi as_m, 1- You cannot make the SRX serve as a DHCP when it's in transparent mode: See page 4 on this PDF...
View ArticleRe: viewing unfiltered bgp routes?
"show route protocol bgp hidden extensive " will display the hidden routes and the reason each of them went hidden. There can be many reasons. Predominantly it might be due to next hop not reachable ....
View ArticleRe: filter-based routing.
interfaces: show interfaces fe-0/0/1 unit 0 { family inet { address 213.167.60.118/30; address 213.167.59.134/30; } }I'll attach show route is here http://pastebin.com/PdB4rgST it's pretty longNow...
View ArticleClik here to view.
config IDP on SRX cluster failed
Dear all, I try install and config IDP on SRX cluster, First step, I download signature DB using: request security idp security-package download on the primary nodeBut when download complete, has the...
View ArticleRe: Unable to access J-web on SRX550
Hi, it looks like i have found the problem. It seems whatever vlan i was on from my client machine needed to be allowed to access the web management. httpd: 2: Error: "Unauthorized", code 401 for URI...
View ArticleRe: Upstream Router ARP Problem
Hi Alex, thanks for the reply. Yes it does receive ARP requests: 09:49:37.170221 bpf_flags 0x81, In Juniper PCAP Flags [Ext, In], PCAP Extension(s) total length 16 Device Media Type Extension TLV #3,...
View ArticleClik here to view.
Re: filter-based routing.
Hi, I was trying to replicate your issue in my lab whithin Proxy-ARP (see attached configuration)And it's working fine after I configured your NATed addresses
View ArticleRe: SRX ALG questions
Thanks for reply, but, unfortunately, don't see answers on my questions. Anybody else?
View ArticleJuniper srx nat issue
I have an issue with static nat. I was assigned /23 subnet for all static nat. My srx is connected to nexus 7k and /23 is advertised on nexus. I have used x.x.x.1 from /23 and created the nat and it is...
View Article