Re: SRX300 TCP-MSS
Hi Mbrandl,Please update us with the results after you open case to TAC.. Troubleshooting , and PR if exist ..Looking for your update
View ArticleRe: export network between routing instances
The security is actually set to any application, and the traffic will be coming form the public Internet so source is set to any source. Once I can get the traffic to reach the server I will set the...
View ArticleClik here to view.
Re: Help configuring VLANs
Some additional info - I'm aware that there are no policies between the telephone zone and everything else. Currently I just want to get a dynamically assigned IP when I connect to ports tagged for the...
View ArticleUpstream Router ARP Problem
Hi, 2 SRX100's in a cluster. (IP addresses obfuscated in the following config.) The problem I have is that the SRX doesn't respond to ARP requests for 109.3.4.88 from the upstream router (109.3.4.65),...
View ArticleRe: Port Forward and DMZ Help.
I think you miss the inside policy from zone untrust to zone trust: set security policies from zone untrust to zone trust policy pol_NAS match source-address anyset security policies from zone untrust...
View ArticleRe: Unable to access J-web on SRX550
The only unusual thing I see here is that you have vrrp setup on the interface. Which address are you connecting to for the Jweb the physical or floating one? does the address respond to ping from the...
View ArticleRe: export network between routing instances
That is step one in the kb, since this has passed your check, you need to continue through the rest of the checks until we find the problem. Since you send the traffic https and no session appears in...
View ArticleSRX1400 vlan and trunking
HI, We have a srx1400 and an ex2200 connected together with a single cable. We planned to create 3 vlans and make a single interface on the srx1400 (ge-0/0/1) a member of those 3 vlans and then make...
View ArticleRe: Port Forward and DMZ Help.
Yes, i've posted a working conf here: http://forums.juniper.net/jnet/board/message?board.id=srx&message.id=43004#M43004 Thanks
View ArticleRe: Upstream Router ARP Problem
Hello,Did You actually see ARP requests for .88 coming from upstream to Your SRX cluster?"monitor traffic interface reth0.0 no-resolve size 9999 layer2-headers extensive matching arp" should show...
View ArticleClik here to view.
Re: Unable to access J-web on SRX550
Hi Steve, Thanks for taking the time to reply, i have tried pinging both of the IP's and get the same result on each. Here is the result of a ping and tracert, both are sucessful.
View ArticleRe: SRX1400 vlan and trunking
It sounds like you are using a version of Junos on the SRX1400 that now has ELS (enhanced layer 2 services). You can run your original configruation through the translator...
View ArticleRe: SRX1400 vlan and trunking
In this situation, I would not use VLANs at all on the SRX end. It sounds from your description that the goal is to use a single port on the SRX and "virtualize" that into a handful of distinct...
View ArticleClik here to view.
Re: filter-based routing.
Can you enable count on filter FILTER1 TERM-test , and check if there is any accepted hits ?Here you can see how to configure...
View ArticleRe: filter-based routing.
I cheked it with "log" rule before and there is accepted hits.Oct 25 12:24:30 tco tco PFE_FW_SYSLOG_IP: FW: vlan.20 A udp 172.17.20.28 93.158.134.3 40423 33434 (1 packets) Oct 25 12:24:30 tco tco...
View ArticleRe: filter-based routing.
How 213.167.60.118 and 213.167.59.134 are configured under the same interface ? are we talking here in subnet /21 ? could you attach configuration under [edit interfaces] hierarchy ?Also attach the...
View ArticleRe: filter-based routing.
Also and if its possible , explain further more the topology and how those three ISPs is connected to get all the picture clear for us .
View ArticleRe: Help configuring VLANs
Here is an example on how to configure trunk on an SRX [edit interfaces ge-0/0/1]set vlan-taggingset unit 10 description salesset unit 10 vlan-id 10set unit 10 family inet address 10.10.0.1/24set unit...
View ArticleRe: Unable to access J-web on SRX550
1- You can try adding management URL: set system services web-management management-url <path> Then browse to: http://x.x.x.x/adminorhttps://x.x.x.x/admin(Where x.x.x.x is the interface IP...
View Article