Re: filter-based routing.
From which 'source address' you're generating the traceroute traffic ?
View ArticleRe: config VPN on SRX failed
What is the version of pulse you are using? And is the PC a windows machine or MAC? Anand
View ArticleRe: config VPN on SRX failed
https://kb.juniper.net/InfoCenter/index?page=content&id=KB23960&smlogin=true&actp=search
View ArticleRe: Clientless VPN to SRX not possible?
I also agree with spuluka in this section . And from my point of view , Juniper is more focusing (at least for the right moment) on the networking \ switching \ data centering sections more than the...
View ArticleRe: export network between routing instances
For some reason I can`t see any session for HTTPS traffic. Just for ping traffic. With that command (show security flow session destination-prefix xxxxx) no session is shown on firewall for HTTPS. I...
View ArticleHelp configuring VLANs
Hi, I'm very new to Juniper and networking in general, and am trying to learn how to set up VLAN across our juniper equipment. The goal is to segment our office network into 4 VLANs: internal, guest,...
View ArticleRe: filter-based routing.
Just running command from 172.17.20.28traceroute 8.8.8.8 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 gateway (172.17.20.1) 1.429 ms 1.395 ms 1.407 ms 2 213.167.56.133...
View ArticleRe: filter-based routing.
Please re-order the terms; command:insert firewall filter FILTER1 term TERM-test before term mgmt-allow
View ArticleRe: config VPN on SRX failed
Hi Abed and Anand10 I using Windows 7 64 bit and Pulse version 5.1.5
View ArticleRe: config VPN on SRX failed
share with us the output of :admin@SRX> show security dynamic-vpn client versionadmin@SRX> show version
View ArticleRe: config VPN on SRX failed
Dear Abed, I send output:root@ROUTER-SRX240>root@ROUTER-SRX240> show security dynamic-vpn client version Junos Pulse 4.0.2.34169root@ROUTER-SRX240>root@ROUTER-SRX240> show version...
View ArticleRe: SRX300 TCP-MSS
I have also put the SRX into Flow Mode and added: security { flow { tcp-mss { all-tcp { mss 1300; } } } However this also failed to work. It appears the SRX is not changing the MSS Values in the...
View ArticleRe: config VPN on SRX failed
Can you please Verify 'HTTPS configuration' step in Dynamic VPN , following http://kb.juniper.net/KB17220
View ArticleUnable to access J-web on SRX550
I am wanting to manage the Firewall from J-Web but am unable to, i get a 401 error in my browser. set system services web-management http interface vlan.999set system services web-management https...
View ArticleRe: SRX300 TCP-MSS
You can verify if setting the tcp-mss/MTU is working by the tcpdump command in the shell> start shell> tcpdump –i (eth interface) host (host ip)MSS is set only during tcp 3-way handshake and is...
View ArticleRe: SRX300 TCP-MSS
Hi A'bed, It shows the MSS as 1460 when it should be 1300 (or 1440 as we regularly have to set) We have just applied a lower MTU at the LNS End of this link and that seems to get round the problem, So...
View ArticleRe: SRX300 TCP-MSS
That's odd ..Can you please disable/enable the physical port you implement on it the tcp-mss 1300 value ?Or rebooting the device ?
View ArticleRe: SRX300 TCP-MSS
Hi Mbrandl, If you feel this is a software bug you can still contact customer care and have a courtesy case opened. Let TAC take a look at this. Anand
View ArticleRe: SRX300 TCP-MSS
Hi Abed, Sorry no luck, Tried the same thing on an SRX220 without issue. ThanksMike
View Article