Re: SRX100 is dead
The device is not booting up. The ports do not bring up any connected ports so attempting to gain access through the 192.168.1.1 address does not work. Yes I have tried reseting the SRX using the rest...
View ArticleRe: Add DMZ on single IP
I've readabout the lack of supportfor UPnP.For using an external Firewall i need to make a 1:1 NAT from untrust zone to the static ip assigned to this firewall, right? Relating PSN network there are...
View ArticleRe: Policy based vpn up but no traffic
Hi, sorry I'm not really sure which configuration you would like to see.(see attachment for the configuration) the Phase 1 and 2 are set up like in book. forward and reverse policies are set up with...
View ArticleRe: SRX100 and BT infinity problem
Also here is teh log of events logged when I'm trying to connect: Nov 23 13:07:11 FW01 RT_FLOW: RT_FLOW_SESSION_CLOSE: session closed idle Timeout: yyy.78.47.93/45081->xxx.142.86.45/1723 junos-pptp...
View ArticleRe: SRX100 and BT infinity problem
It looks like the PPTP server is not responding.Could you check the logs on the server? And maybe run a packet capture on it.Also make sure you can ping or at least arp the server IP (192.168.1.225)...
View ArticleRe: Policy based vpn up but no traffic
I assume you shared the configuration for the local VPN gateway.On this VPN gateway you need to make sure that you have a route to 192.168.75.5/32 that egresses on ge-0/0/0.0I believe you have it as...
View ArticleRe: QOS question - phsyical port speed override?
ive tried this and i dont get it working. I have also noticed that using % for shaping of interface bandwidth is a bad idea. I initially thought that it would use the value on the bandwidth statement...
View ArticleRe: SRX100 VPN problem
Thank you I did add your listed command and Commit. Its still not working. I tryed to ping the 192.168.178.5 interface from my PC and got no responce when I connected to the VPN. HH.164.205.14 no...
View ArticleRe: SRX100 and BT infinity problem
I just had Microsoft logged on to my server and investigating as I was almost sure that the problem must be with RRAS server or Hyper-V setup but they brought very interesting point. Theylogged on to...
View ArticleRe: Policy based vpn up but no traffic
Hi, I dont believe you the route is needed as this is policy-based vpn and not route based one.am I mistaken?
View ArticleRe: SRX100 and BT infinity problem
From the below output you can state the following: Nov 23 13:07:11 FW01 RT_FLOW: RT_FLOW_SESSION_CLOSE: session closed idle Timeout: yyy.78.47.93/45081->yyy.78.47.93/1723 junos-pptp...
View ArticleRe: Policy based vpn up but no traffic
Hi dan_b, Yes the route is required. Otherwise how would the remote peer know where to send the return traffic? --If this post solves your problem, please mark this post as "Accepted Solution".Kudos...
View ArticleRe: SRX100 and BT infinity problem
Thank you for this anylysis pantunes. Yes, I can ping my RRAS server from srx and I can 'telnet 192.168.1.225 1723' locally from my Hyper-V host. Also firewall is disabled on host and RRAS for testing...
View ArticleRe: SRX100 and BT infinity problem
Might be silly question but can this behaviour be caused by a network switch? This is the only thing between srx and the server. Port configuration/incorrect frame size/port speed?
View ArticleSRX240H2 + Cradlepoint IBR650 VLAN Issues?
HI, I've got setup a brand new Cradlepoint IBR650, which when tested externally, works perfectly fine on the VLANs it has configured for the interface setup, essnetially a port trunk of 2x VLANs on the...
View ArticleClik here to view.
Re: Can SRX series work with Shrew Soft VPN client?
Still facing instable connections. Is there anyone with SRX device + ShrewSoft VPN with stable connections for longer periods? Or is there a limit to the number of concurrent VPN users?...
View ArticleRe: SRX100 and BT infinity problem
I am not sure if you tried to telnet to the PPTP server port 1723 (telnet 192.168.1.225 port 1723) from the SRX.If you are able then the issue may be with the PPTP ALG on the firewall.I you aren't then...
View ArticleRe: Add DMZ on single IP
Your configuration matches his recommended settings for NAT. Do you also need those under the table to play a game? If so both http and https are used by the SRX inbound and you would need to change...
View ArticleRe: Policy based vpn up but no traffic
I confirmed your posted cnfiguration is indeed a policy based VPN so you do NOT need a route installed for this to work correctly. Furthermore your first posting shows that the policy is being hit...
View Article