Dynamic-vpn srx220 OS 12.1X46-D35.1
Hello, I have been followed Example: Configuring Dynamic VPN (http://www.juniper.net/techpubs/en_US/junos12.1/topics/example/vpn-security-dynamic-example-configur...)to configure our dynamic vpn but...
View ArticleRe: vSRX in vSphere 6.5
I managed to fix this by using the VMWare workstation GUI (As 6.5 does not support the "fat" client) and upgrade my VMWare Version to 11) After that I could open the edit page in the VSphere...
View ArticleSRX210 - Ricoh MFP doesn't get internet connection
Hi guys, i know this post is a bit off everything but i would need somebody to check my config in order to tell me that every device connected to this network should be online. We put a Ricoh MFP C3004...
View ArticleRe: SRX Cluster: Interface monitoring in RG0?
Hi. I am not sure which version of code you are running but JTAC does NOT recommend configuring Interface monitoring on RG0. See...
View ArticleRe: New config for SRX240
Hi, They should indeed receive all information from provider.It's the network where modem and digicorders are connected. Thanks,Filip
View ArticleRe: SRX210 - Ricoh MFP doesn't get internet connection
Hi, I expect you try to put the MFP into vlan-trust (192.168.1.0/24 on vlan.0). My best guess is that you are missing DNS server in your dhcp server configuration... so the MFP has internet access but...
View ArticleRe: SRX firewall routing configuration
thanks spuluka am reviewing and matching one by one to understandfor sure will come back, much appreciated
View ArticleRe: SRX210 - Ricoh MFP doesn't get internet connection
Couple of cleanup/issues in your config: 1) Cannot configure Speed 1g on fe-0/0/7 as this is a 100Mb interface2) Removed interface vlan.100 in interface and vlans as this is not doing anything3) Have...
View ArticleRe: New config for SRX240
Then you simply need to tag all interfaces with both VLAN's, except for ge-0/0/0 which takes the ISP handoff. An RVI for VLAN 99 is configured to accept a DHCP address from the provider. Assuming you...
View ArticleHow to configure multiple hw-addresses on one interface
Is there a way to have one physical interface host more than one hw-address? I am connecting an SRX210 to a service provider device that is very specific on what is allowed. I am having it installed in...
View ArticleUpgrade SRX210H from 10.4r3.4
My SRX210H has been on the shelf for years. I recently got interested in dusting it off and learning it again. It currently has 10.4r3.4 on it and it took me failing to get 12.1 installed and a lot of...
View ArticleRe: Upgrade SRX210H from 10.4r3.4
Contact support. They should be able to provide the needed releases.
View ArticleSRG 320. IPSEC vpn worked then got flakey
New SRX 320 install (SRX300-JSB), upgrade from an SSG-20 About 25 or so Avaya IP Phones with IPSEC client firmware loaded. Using local/internal xauth database. On initial installatiion, the 25 remote...
View ArticleRe: Site to Site VPN between a SRX w/dynamic IP to SRX w/static IP
i just got dont doing this here are my scrub configs im leaving out the routing and such my head end SRX-240 set interfaces st0 unit 10 description SOHO-10-set security ike proposal SOHO-10...
View ArticleQos in test shows high ping times
hellp have been working on my QOS that last few months, have some traffic generators in for testing maxing out hte link (3mb) and have a voice call is fine. but pinging a critical server that goes into...
View ArticleRe: advertise OSPF static routes into stub/t-stub
i ened up going the BGP route, it was easier. then i realized it should work without the routes do to my FW config on the other side...... and it does so didn't really need it, but I got some good...
View Articleissue dynamic vpn
i have a dynamic vpn and two isp, my problem is that I managed to connect but I do not get to the protected resources, but if I disable the isp that does not have the ip public and only leave the isp...
View ArticleRe: SRG 320. IPSEC vpn worked then got flakey
I would check and make sure that your SIP and/or H.323 ALG settings on the SRX are the same as on the SSG (i.e. on or off)
View ArticleRe: SRG 320. IPSEC vpn worked then got flakey
SIP not relevant, H.323 is definitely off.
View ArticleRe: SOHO practicality
So are there any charges associated with operating a switch and a gateway device?There are two types of on-going charges you can have with Juniper devices, support and licenses. Support is needed if...
View Article