Re: SRX 3600 chassis cluster cant configure IPv6 Static route with J-Web
Hello , Can you share the output of : show security flow status
View ArticleRe: SRX 3600 chassis cluster cant configure IPv6 Static route with J-Web
Thank Sam for your reply, My devices are used only for LAB. They have only one connection from FW to my laptop for testing. Now, by some reasons, I cant show that command for you. Any ideal for my...
View ArticleRe: SRX 3600 chassis cluster cant configure IPv6 Static route with J-Web
Hello , As per you , you are able make CLI changes but the IPV6 tab in SRX Web GUI is inactive . Either its that the IPV6 is not enaled :...
View ArticleRe: SRX300 cos on st0 and ge-0/0/0
Dear Shailesh, I finally upgrade my SRX300 to 15.1X49-D60.7. attached is the config file and I have followed your concept to implement.I have created 2 schedulers, net0-scheduler and net1-scheduler....
View ArticleRe: Snmp v3 srx cluster, engine-id
Ah ok, about engine-id. Does that have to be unique, or can i use like "node0" and "node1" as engine id on all my srx devices?
View ArticleRe: SRX 3600 chassis cluster cant configure IPv6 Static route with J-Web
I remember that I checked that command, output is OK then I can configure IPv6 static route and see IPv6 static route in "show route" output. I'm using version 12.3X48-D35 but version 12.3X48-D40 is...
View ArticleRe: SRX 3600 chassis cluster cant configure IPv6 Static route with J-Web
Hello Dan , In that case it could be a J-Web issue . Either you can try upgrade to latest version to see if you get the same issue . If still you see the same issue , please open a JTAC ticket .
View ArticleRe: SRX firewall routing configuration
The local routes are ones assigned in the configuration to interfaces. Reject means the interface with that ip address is admin up and link down. You need to check the cabling attached to that...
View Articleenabling web interface for irb.10 interface
Hi all,i want to enable web interface for a irb.10.This interface has a ip address of 172.16.11.1.i can access it through ssh but when trying to access it through web.then can not access web gui.any...
View ArticleRe: Snmp v3 srx cluster, engine-id
Hello, fisk4 wrote:Does that have to be unique, or can i use like "node0" and "node1" as engine id on all my srx devices?Are You looking to simplify the deployment of Your numerous SRX clusters, or...
View ArticleRe: Snmp v3 srx cluster, engine-id
Simplify, well are using Network Monitoring in space
View ArticleSRX 300 -> Licenses
Hi all, I need some help to understand Juniper`s new licensing-model.Since the SRX300 there are two softwarepackages / licenses to choose.JSB and JSE.For my purpose, I only need JSB.Is it correct, when...
View ArticleBetreff: SRX 300 -> Licenses
Hi Christoph, the Licenses are trust-based - however to legally run the device you need to purchase JSE or JSB - without a license you are basically violating the Licensing from Juniper..So for the...
View ArticleBetreff: SRX 300 -> Licenses
Hi Chris, thanks for the fast reply.So there is no need, to insert the key/license into the device.Correct ? Cheers, Christoph.
View Articleintegrated user firewall: domain user on non-domain computer
Hi.I configure integrated user firewall and it all work perfect exept one thing.When "client" use domain computer - he goes to internet correctly, but when client use hes own laptop - he got a...
View ArticleSRX Route VPN - Random tunnel tear downs
Running SRX550 12.3x48-D30 and have a few VPN tunnels using IKEv2 . Tunnels, zones, interfaces are all broken out into custom routing tables for complete separation. OSPF is also running over the st0.x...
View ArticleBetreff: SRX 300 -> Licenses
Hi Christoph, with current software versions (15.1X49) the licensing is trust-based but with later software releases the licenses will be enforced - so remember to keep your authkey around to generate...
View ArticleCan't get cluster of SRX100 working
Two SRX100. Ports 5 and 7 are connected using crossover. Port 6 (on both) are connected to our management network. node0: ## Last commit: 2017-02-14 01:26:13 UTC by indeni version 12.1X46-D35.1; groups...
View ArticleRe: Can't get cluster of SRX100 working
At the very least you need to upgrade node1 (12.1X44) to match node0 (12.1X46-D35.1) or a cluster will not form. I would think you would still get link on fab0 and fab1 but perhaps not.
View ArticleRe: Can't get cluster of SRX100 working
Step 1.Make sure both nodes have same Junos version- This is a must for cluster to work fine. Step 2.Delete complete config from both nodes and just keep root password . Step 3.Connect ge-0/0/5 and...
View Article