Re: SRX 3600 chassis cluster cant configure IPv6 Static route with J-Web
Just to update you that the issue is fixed from upcoming release 12.3X48-D50. You may plan your upgrade accordingly.
View ArticleRemote Desktop Out to Internet Host
I have a SRX240 with the factory load from the reset switch. I have established basic internet connectivity. I have several internet hosts that I remotely manage with Miccrosoft's RDP from within the...
View ArticleJSRPD_SET_HW_MON_FAILURE : hw-mon failed for redundancy-group 1
Dear Expert, Anybody already experienced that issue. I ave two SRX1400 in cluster and All of the sudden, I got below logs.Anybody having an idea in what is going on ? JSRPD============XXX xx xx:xx:xx...
View ArticleRe: SRX branch - is it possible to disable auto-power-on?
Hello, R_J wrote: A potential scenario I've heard about is when there is a power-cut, one site goes down A good UPS will solve Your problem and also provides protection from SRX flash corruption after...
View ArticleRe: Remote Desktop Out to Internet Host
My bad. When in doubt, plug directly in to the internet and make sure the problem does not exist on the other end of the pipe. Our NOC was supposed to have us whitelisted for all hosts., but, 3 out...
View ArticleRe: SRX Route VPN - Random tunnel tear downs
Also noticing the following log message that causes traffic loss accross the VPN: Feb 11 12:37:11 192.168.141.80 Feb 11 12:37:11 VPN-NODE-NAME VPN-NODE-NAME: kmd[2803]: IPSec negotiation failed with...
View ArticleRe: JSRPD_SET_HW_MON_FAILURE : hw-mon failed for redundancy-group 1
Hello , This seems like the FPC have a Major error reported and HW monitoring was down which caused the failover . Please check for any core dumps : > show system core-dump If you see any core...
View ArticleRe: Help with a vpn configuration
Hello , This looks like the proposal set is mismatching between the 2 peers , Please make sure that the VPN devices use the same set of proposals for IKE , with correct pre-shared key . Please share...
View ArticleRDP sessions randomly drop with SESSION protection
Hi, We are using SRX3400 at the datacenter with SCREEN enabled. We have enabled almost all SCREEN options and we are experiencing drops on tcp sessions randomly. When it comes to RDP it becomes much...
View ArticleRe: RDP sessions randomly drop with SESSION protection
Hi, I would suggest using "alarm without drop" option for the screens in order to determine the correct threshold for the various screens...
View ArticleClik here to view.
Re: cisco asa to juniper srx vpn site to site not working !!!!
dear all i spent last week try on srx side and make configuration =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.02.14 16:35:21 =~=~=~=~=~=~=~=~=~=~=~= set version 12.3X48-D35.7 set system host-name...
View ArticleRe: RDP sessions randomly drop with SESSION protection
Hi Sahil, Thank you for the tip. I will definitely check that out. Besides than that do you have any other suggestions, like this one, about screen for me as a best practice maybe ? Thanks
View ArticleRe: RDP sessions randomly drop with SESSION protection
Hi Sahil, It turns out that, that feature is not supported on SRX3400 unfortunately. Do you have any other suggestions ?
View ArticleRe: cisco asa to juniper srx vpn site to site not working !!!!
elbeshti mohamed wrote:dear all i connect the other company that have cisco asa and give me thair configuration VPN Parameters Peer Device / IOS:Cisco-ASA Authentication:Pre-shared KeysWill be...
View ArticleRe: SRX branch - is it possible to disable auto-power-on?
Its not possible and its recommended to avoid such power issues as it can corrupt the device file system and may be the device itself.
View ArticleRe: Help with a vpn configuration
Do you have the remote side config? Looks like some confog mis match.
View ArticleRe: RDP sessions randomly drop with SESSION protection
Are you saying RDP connections blocked by SCREEN ? Or how did you confirm its the screen config thats creating issue and nothing else? The reason if if screen is creating performance issues I expect...
View ArticleRe: SRX firewall routing configuration
Hi again, the result related to the issue interface, of the commandshow interfaces terse is as follow Interface Admin Link Proto Local Remotereth4 up...
View ArticleRe: SRX firewall routing configuration
Yes, this is showing that your link from this interface is down. Interface Admin Link Proto Local Remote reth4 up downAdmin = the interface configuration is activeLink = the physical layer link is down...
View Article