Destination NAT for PPTP failing randomly
Hello, I would like to know if anyone has experienced something similar and/or find out if this is a known issue? The issue: we have a policy ( untrust to trust ) to allow pptp traffic to an internal...
View Article"verify-sig:" error when upgrading software on an srx650
I get an error when upgrading the software package on a SRX650. I have 2 identical 650s, one had no issue, one gives an error. I have tried downloading 2 different packages, same issue. I have...
View ArticleRe: "verify-sig:" error when upgrading software on an srx650
Since you have upgraded one device successfully, we can take a snapshot from that device and get this device upgraded.Step 1. Plugin USB to upgraded device and issue " root> request system snapshot...
View ArticleSRX and ESX Configuration Assistance For Newbie
Hello, I have two networks at home which right now are all part of the same network with the exception of two physical wireless APs on separate SSIDs; one for work and one for home. I own a SRX240H2...
View ArticleRe: "verify-sig:" error when upgrading software on an srx650
I had same issue once on SRX210 when trying to upgrade from 10.4 to 12.1. Had to upgrade to 11.4 first and then to 12.1.
View ArticleRe: "verify-sig:" error when upgrading software on an srx650
I get an error when trying to snapshot to the usb; "usb media missin g or invalid"
View ArticleRe: "verify-sig:" error when upgrading software on an srx650
whats the size of usb? try using something below 8gb. also you may try plugin to different usb slot
View ArticleRe: Access Internal IP of firewall over VPN - SRX 340
delete untrust to trust policy allow-dynvpn-internal, you cannot use security policy to control dynamic vpn access . you need to have any any policy. in your case you need to specify the dynamic vpn...
View ArticleRe: VPN Route issue with traffic selector
multiple traffic selector to same remote protected resource is not supported. since traffic selector adds the routes automatically multiple traffic selectors to same remote ip can cause issues as you...
View ArticleRe: RDP sessions randomly drop with SESSION protection
I am not trying to say that SCREEN is dropping RDP connections, I dont have a clue for that. What I am trying to say is; RDP sessions drop randomly and can SCREEN be the cause or should I look for...
View ArticleRe: Is is have traffic impact?
The IPSEC ALG solves a specfic problem. You only need this if you have a VPN appliance behing the SRX getting a NAT from the SRX AND the appliance does NOT support NAT-T. If you device has NAT-T...
View ArticleRe: RDP sessions randomly drop with SESSION protection
Does this only happen to RDP or are other Services that need to pass the SRX impacted?Could it be that your SRX drops rdp because of a "timeout"?Out of the Box this happens when there is no "input" for...
View ArticleRe: SRX and ESX Configuration Assistance For Newbie
I'd suggest breaking down the setup into sections. 1-Setup dual VLAN and zones for your two computer segments as desired2-Adjust the security policies as desired between the two zones3-Add on the...
View ArticleRe: RDP sessions randomly drop with SESSION protection
This makes it clear. I really dont think screen can cause this behavior. Is it the same source and destination you are using to test via 2 ISP? If not can you check the behavior with same source and...
View ArticleRe: Destination NAT for PPTP failing randomly
It could be a bug as 12.1X47 was a little buggy version and its already End Of Life. I would recommend you upgrade to any latest/recommended Junos version and check the behavior.
View ArticleSRX5800 -->minor alarm Mixed Master and Backup RE types?
Hi All, I have buy SRX5800 with dual RE. May i know how to clear chassis alarm as per below: root# run show chassis alarms 1 alarms currently activeAlarm time Class Description2017-02-23...
View ArticleRe: SRX5800 -->minor alarm Mixed Master and Backup RE types?
Hi,This alarm is a minor alarm and it is common in routers when different RE models are installed in the...
View ArticleSRX 1500 Software Upgrade Error
Hi everyboy, i try to upgrade a SRX 1500 from 15.1X49-D60.7 to 15.1X49-D70. I tried the installation package called "junos-srxentedge....", but i got an error: root>...
View ArticleRe: SRX 1500 Software Upgrade Error
Looks like a storage issue. Can you try doing a "request system storage cleanup" and delete unwanted files from /var/tmp and try upgrade again?
View Article