Re: Anyone get the SRX-1500?
The QFX uses a 2.5 GHz 4-core Intel CPU and 128GB SSD vs the EX4200's 1Ghz PPC cpu and 1Gb flash. I would imagine that plays a large part in commit processing time.
View ArticleRe: Anyone get the SRX-1500?
We were talking about SRX1500 and didn't realize we were base lining against EX4200's.Commit time is less of a concern for me in any case. Actual traffic performance and stability are the things which...
View ArticleRe: Anyone get the SRX-1500?
Note, I get that gathering others real world experiences of a platform helps a great deal as part of the qualification process. I would be doing the same. So far I haven't heard anything bad about the...
View ArticleRe: Anyone get the SRX-1500?
I'm too busy to summarize the beginning thread for you but I was anecdotally comparing the reported improved commit time on the SRX1500 to that of the QFX vs EX. Regarding new hardware in a mission...
View ArticleDHCPV6 server drops packets due to authentication
I have set up a dhcpv6 client and server on an srx240 connected to a Comcast modem via ge-3/0/0. I have enabled ipv6 flow mode and allowed dhcpv6 in the security zone. ge-3/0/0 { unit 0 {...
View ArticleRe: Anyone get the SRX-1500?
It seems like a pretty safe bet SRX650 replacement with some welcome extra performance to boot. Hopefully I will get to have some practical experience of it shortly. If I do soon I will post something....
View ArticleClik here to view.
SRX Upgrade Compatibility Issue
Dear All I am getting below error while doing upgrade of Junos from 12.1X45-D15.5 to...
View ArticleRe: SRX Upgrade Compatibility Issue
Hi,1- Try using "no-validate" option when upgrading2- Try "request system storage cleanup" then try upgrading again3- if not , try to upgrade through the J-WEB
View ArticleRe: SRX Upgrade Compatibility Issue
Hi, Please save your latest config as the rescue configuration. As per the error message, the validation is failing with the rescue configuration. You can do that using the following command :-"request...
View ArticleClik here to view.
DIP/Static NAT IP is not in the Same Subnet of outside Interface
Hi all, Could you see the belowing picture, this is my requirement, I need to map a server in private network into a public IP that is not in the same subnet of our firewall outside interface. Because...
View ArticleClik here to view.
Accidental Power Loss - Juniper SRX 100H
Hey Members. Last week I had to reroute some power cables on some devcies in the server room and our Juniper SRX100H accidently had its power removed, my fault. After noticing it was no longer powered...
View ArticleRe: SRX Upgrade Compatibility Issue
Hi harishbabum, The reason for the error is that part of your current configuration isn't compatible with Junos version 12.1X46-D40.2. Namely your disablement of the real ALG, you'll have to delete...
View ArticleRe: Accidental Power Loss - Juniper SRX 100H
Use that link for information and how to do http://rtoodtoo.net/recovering-primary-junos-image/ regards alexander
View ArticleRe: DIP/Static NAT IP is not in the Same Subnet of outside Interface
Hi ! 1. You do not need proxy-arp ( the neighboring router arps for the nect-hop address which is the outside interface address)2 if always the initiating packet that triggers the flow is strictly...
View ArticleRe: Anyone get the SRX-1500?
One other thing to note - in talking with the SRX PM's the feature set of the SRX1500 should be very similar to that of the vSRX platform. Keep that in mind when you're looking for features that...
View ArticleRe: Accidental Power Loss - Juniper SRX 100H
Thank you alexander. Alexander must I be the root user? The company who managed this devcie simply made me an account to login, but I'm not sure if my admin account has the same credentials as an...
View ArticleRe: Accidental Power Loss - Juniper SRX 100H
You are good to go. You can use the command >request system snapshot slice alternate, to repair the primary partition. The system is working as designed with the dual root partition. it is for...
View ArticleRe: Anyone get the SRX-1500?
I have not seen one of those as yet either, but I was looking at the feature set recently. Be sure to compare it with the 1400 and note if any differences (I only notince one and that is the cps). But...
View ArticleRe: DIP/Static NAT IP is not in the Same Subnet of outside Interface
Why not just add 2.2.2.2 to the extenal inteface and configure static nat and the correct security policies to allow traffic to the server.
View ArticleRe: monitor policer stats in SRX1400, 12.1X44 using simple-filter
did you already commit the configuration? Because it does not seem like the firewall filter has been applied/committed.
View Article