SRX210 load-balancing
Hy everybody,I'm new here and would like to have some information regarding the SRX210. I am actually trying to use 2 SRX210, with two uplinks (for tests).I've activated per-packet load balacing and...
View ArticleRe: SRX210 load-balancing
Hi Icube, The SRX does support "real load balancing" and uses layer 4 information if properly configured. Its hard to help you without seeing your setup, configurations and the exact commands you used...
View ArticleRe: SRX210 load-balancing
Thank you for your answer. I used the same link to do the configuration. I have no access to the router right now but I'll try to post it ASAP. For the tests, I used Paris-traceroute in a script with...
View ArticleRe: SRX210 load-balancing
Hi Icube, It would be better if we see the topology to understand where you initiated the sessions from and where to ? We need to see a graph of your topology and the client networks on both sides of...
View ArticleClik here to view.
Re: SRX210 load-balancing
This is my topology. It's a testbed so there is no connection to other networks. Configuration of both routers and the ouput of my traceroute are attached. I'm quite new to JUNOS so if there is...
View ArticleRe: SRX210 load-balancing
Thanks Icube ! Quick observation before troubleshooting further, you're missing the hashing for layer-3. Paste the following command into both SRXs configuration mode : set forwarding-options hash-key...
View ArticleRe: monitor policer stats in SRX1400, 12.1X44 using simple-filter
Hello. Seems we can't use the same commands when using simple-filters... SRX1400> show policer ? Possible completions:<[Enter]> Execute this command<policer> Policer name...
View ArticleFailed connection - Juno Pulse 4.0 on Windows 10 Professional
Hello members. I have a Juniper SRX100H at our place of business and recently I was asked to install Juno Pulse for some remote users. I successfully installed and connected to the SRX with Windows 7...
View ArticleRe: Avaya VPN Phone with SRX
I have followed this document and the site-to-site vpn does not seem to be working the the avaya 9600 phone. is there any another information you can provide?
View ArticleRe: Avaya VPN Phone with SRX
According to page 4 of the document , 9600 should be a validated equipment ., but should use the validated software version also , witch is 3.1 .
View ArticleRe: Failed connection - Juno Pulse 4.0 on Windows 10 Professional
Hi,Junos Pulse is not supported on Windows 10Reference:http://kb.juniper.net/InfoCenter/index?page=content&id=KB23960&actp=search
View ArticleRe: Avaya VPN Phone with SRX
Is the phone beiong setup as an H323 phone or using the vpn feature on the phone itself. The docuement is not clear there. Also is the 9600 protocol on sip or h323? Also can this setup with an ip...
View ArticleRe: Multiple logical interfaces per one physical
Peter, from my experience I dont seen any options for adding logical or aditional tag's to an SRX unit without using vlan tagging. and I'm assuming your not just trying to add an additional IP...
View ArticleClik here to view.
Re: Anyone get the SRX-1500?
Hi Paul,I've been involved in the Sky ATP beta with one and it's quite nice. The speed is unreal, I feel like it finishes a commit as soon as I think of typing it in Mostly I've been using the Sky...
View ArticleRe: unstable connection to leased IPVPN location after switching to SRX
Hi again and thanks for the info. We've tried the tcp mss fix but it does not help. the strange thing is that when connecting from internet to the same server via RDP(dnat) all is fine connection is...
View ArticleRe: SRX210 load-balancing
Sorry for not answering. I unfortunately have no access to the hardware until monday. But we finaly found something. Using multiple connections, we figured out that different paths means different...
View ArticleRe: Anyone get the SRX-1500?
Thanks Scott, good to hear. We won't be doing anything beyond basic policies and NAT as it is a direct swap of a pair of 650's so don't expect any issues. I'll report back once it's in production. We...
View ArticleRe: Anyone get the SRX-1500?
Interesting. What specifically is the commit time decrease attributed to, which other platforms exhibit this behaviour and which Junos versions?For me the SRX1500 would be my natural evolution from...
View ArticleRe: unstable connection to leased IPVPN location after switching to SRX
some more details just found: when setting static route on client the rdp connection is stable, no problems or timeouts.(I guess client does not go through srx to reach remote subnet) back to the...
View ArticleError IPV6 route !
hello, my gateway is the srx220h2 i'm testing for configuration a add static route for gateway2001:41d0:13:4cff:ff:ff:ff:ff normaled it's show route ::/0 *[Static/5] 00:00:19> to [GATEWAY] via...
View Article