Question abot logical-systems and address-book
Hi Guys, I'd like to know if I can create global address in a LSYS such as: set logical-systems NAME_OF_LSYS security address-book global address xxx Thanks
View ArticleRe: hub and spoke VPN
1- NO2- Yes, you just need to configure proxy-identity on the Route-based side to match the VPN security policy on the policy-based side.
View ArticleRe: SRX300 usb serial console driver - which one?
This public link might also help: https://kb.juniper.net/InfoCenter/index?page=content&id=KB31671&cat=&actp=LIST Summary:This article provides the links to drivers used for USB console on...
View ArticleRe: SRX300 usb serial console driver - which one?
PUTTY works perfectly. The options I set are - Connection type - SerialSerial line - COM4(you may need to use a different COM port)Speed - 9600 Then I set up the console screen as I want it. PUTTY is...
View ArticleICMP screen filling loogs from IPAM scans
RT_SCREEN_ICMP: Address sweep! source: 10.x.x.x, destination: 10.x.x.x zone name: Untrust, interface name: fe-0/0/4.0, action: alarm-without-drop the source is our solarwinds box IPAM scanning the...
View ArticleRe: SRX240 cluster with LACP through a Cisco switch
you need to set to active and fast set interfaces ae1 aggregated-ether-options lacp activeset interfaces ae1 aggregated-ether-options lacp periodic fast we have a bunch of cisco and junos and I have...
View ArticleRe: SRX240 cluster with LACP through a Cisco switch
whoop had my cisco side wrong for got the FAST but it worked still we are in a nexus VPC config I can confirm this will work on a regular switch as well show lacp interfaces Jun 07 12:28:58Aggregated...
View ArticleGroup-VPN
i studied GVPN and i understood its concept but i haven't seen or worked in a place using GVPN either cisco or juniper ...i want to know who use GVPN ?? is it used by serivce provider or by enterprises...
View ArticleRe: web-management port
Worked. Thanks... Now my last question: My web-management-url is set "admin".. how do I use this? my internal IP is 10.196.24.1, so if I put 10.196.24.1/admin is should open the web management?if yes...
View ArticleRe: web-management port
Yes, the custom url comes after the ip address. But in your case you also have a custom port which would be added. 10.196.24.1:8081/admin
View ArticleRe: ICMP screen filling loogs from IPAM scans
I don't see any whitelist options for ICMP either. https://www.juniper.net/documentation/en_US/junos/information-products/pathway-pages/security/security-attack-denial-of-service.pdf
View ArticleRe: Group-VPN
Juniper ADVPN and Cisco DVPN are used generally by large enterprises with a number of remote sites connecting using IPSEC VPN over the internet to a VPN conncentrator at the central site. These...
View ArticleRe: Group-VPN
One of advantages of Group VPN: Maintains network intelligence such as full-mesh connectivity, natural routing path, and quality of service (QoS) in MPLS networks. Don't know the market, but from my...
View ArticleRe: ICMP screen filling loogs from IPAM scans
Hi The only option is to put a firewall filter matching the ICMP and send as packet mode.
View ArticleDHCP option 121. how to specify /16 mask?
Hello,I'm trying to distribute addition route to dhcp clients using dhcp 121 option and this KBhttps://kb.juniper.net/InfoCenter/index?page=content&id=KB26862set system services dhcp option 121...
View ArticleRe: DHCP option 121. how to specify /16 mask?
You should try: set system services dhcp option 121 array ip-address 16.0.172.16set system services dhcp option 121 array ip-address 192.168.55.1
View ArticleRe: DHCP option 121. how to specify /16 mask?
There you go: set system services dhcp option 121 array ip-address 16.172.16.192set system services dhcp option 121 array ip-address 168.55.1.0
View ArticleRe: DHCP option 121. how to specify /16 mask?
nope =) I've already tried to play a "guess who" game.
View ArticleRe: DHCP option 121. how to specify /16 mask?
What about this : set system services dhcp option 121 array integer [16 172 16 192 168 55 1]
View Article