Re: SRX110H2-VA VDSL PIC Firmware
The jfirmware link you have below is for the bootloader which is part of the main chassis fireware not a card. I suspect based on the kb that the firmware is rolled into the main Junos upgrade and...
View ArticleRe: Dynamic VPN landing page on public IP.
Sorry for the confusion. What I meant was if you can create a dns entry for the srx. You can then submit a request for a certificate from a legitimate authority instead of using the self signed one....
View ArticleClik here to view.
Re: IKEv2 Traffic Slector in 17.X
Typically in Junos once a feature is introduced it is in all the subsequent releases too unless it gets deprecated and replaced with a new feature. Feature explorer then lists the version where the...
View Articlehelp with transparent mode
trying to set srx300 into global-mode transparent bridge i am following the artical https://kb.juniper.net/KB31147 and the unit will not go into the required mode how is this done i am typing set...
View ArticleRe: SRX320 VPN authentication with Yubikey?
No suggestions at all? What about for a different hardware token?
View ArticleRe: help with transparent mode
If you issue 'show ethernet-switching global-information', what is listed for 'Global Mode'?Which version of software are you using? It appears that command is available starting in 15.1X49-D40, and...
View ArticleMobile Signal Level into Cacti
Hi,Is there any way to graph mobile signal level into cacti from LTE Mini PIM card. Can you please advice MIB/OID used for this purpose or any other workaround. Thanks,
View ArticleRe: help with transparent mode
Mac aging interval . 0Mac learning .enableMac statistics . DisabledMac limit count. 0Mac limit hit. DiasbledMac packet action drop . DisabledLe aging time .1200Le vlan aging time. 1200Glbal mode ....
View ArticleRe: help with transparent mode
I this article https://www.juniper.net/documentation/en_US/junos/topics/concept/security-layer2-bridging-transparent-mode-overview.html this is exactly what I'm trying to accomplish switching mode with...
View ArticleRe: SRX320 VPN authentication with Yubikey?
Hello,AFAIK, only Yubikey+Yubiradius can be made to work with SRX (or any other Juniper router/switch/firewall).JUNOS supports only RADIUS and TACACS for authentication and does not support Yubico OTP...
View ArticleRe: failover or bgp vpn between SRX (Site A) to SRX & SSG5 (at same site with...
We have site-site to vpn between Site A & Site B , (Site A SRX 210 , Site B SSG5 ) till now everything is perfect but now we added new SRX210 at Site B with another ISP. So now SRX210 at Site A...
View ArticleRe: failover or bgp vpn between SRX (Site A) to SRX & SSG5 (at same site with...
Hello,There is not enough information in Your OP to offer You a solution. The following points need to be clarified:1/ do You expect Site A SRX210 to connect to Site B SRX 210 _ONLY_ when Site B SSG is...
View ArticleRe: failover or bgp vpn between SRX (Site A) to SRX & SSG5 (at same site with...
Hi aarseniev , "" 2/ should Site A SRX 210 have 2 established IPSec tunnels to both Site B SRX 210 and Site B SSG at all times, and let the OSPF|BGP running inside IPSec tunnels figure out...
View ArticleRe: failover or bgp vpn between SRX (Site A) to SRX & SSG5 (at same site with...
Hello, wrote:Hi aarseniev , "" 2/ should Site A SRX 210 have 2 established IPSec tunnels to both Site B SRX 210 and Site B SSG at all times, and let the OSPF|BGP running inside IPSec tunnels...
View ArticleSSH Issue on SRX1500
Hi all, I still have an issue on one SRX that simply will not accept SSH connectivity. It is configured exactly the same as the other SRX does allow SSH connectivity. As this equipment is going into...
View ArticleRe: SSH Issue on SRX1500
I am assuming your running a cluster and you are configuring out-if-band management (fxp0)? If so, there are number of reasons this will happen, for example:...
View ArticleRe: SSH Issue on SRX1500
Hi Dawid, Thank you for the response. No, we are not utilising a cluster for a specific reason that I cannot give. But that reason overrides the need for a cluster. FXP0 not being utilised. The...
View ArticleRe: failover or bgp vpn between SRX (Site A) to SRX & SSG5 (at same site with...
Hi aarseniev, This is my plan : Site A srx210 site-site vpn with SSG5 is up and working now ! (ISP 1)Site A srx210 site-site vpn with SRX210 should work now with same intranet n/w (...
View ArticleRe: SSH Issue on SRX1500
I think I have found a way around this, or at least to test, but when I login to the shell as root and try and make a directory under /etc I get the followng error: mkdir: test1: Read-only file system...
View ArticleRe: SSH Issue on SRX1500
It looks like you do not have certificate.To generate: >start shell user root% ssh-keygen rsa -f /etc/ssh/ssh_host_rsa_key RegardsLeon SmirnovPlease Mark My Solution Accepted if it Helped, Kudos...
View Article