SRX VPN network issue
Hello all, please help.I recently had a SRX 210 completely crash and i did not have a config back-up.I know my fault. I had site to site VPNs setup and know i cant remember how i set it up since i...
View ArticleRe: SRX VPN network issue
Hi Dustin, The following tool will help you for sure: https://support.juniper.net/support/tools/vpnconfig/ Note you have to choose the option "Local Static IP <<->> Remote Dynamic IP". I...
View ArticleRe: SRX VPN network issue
Dustin,if you can describe a little bit more in terms of VPN configuration that has been added along with error message that you see.Do you see IKE or IPSEC SA up? If not then suggestion is to enable...
View ArticleRe: SRX VPN network issue
root@RootsBrookfieldWI-SRX210he# run show configuration## Last commit: 2019-06-12 18:13:58 CDT by rootversion 12.1X46-D45.4;system {host-name RootsBrookfieldWI-SRX210he;time-zone...
View ArticleClik here to view.
Re: SRX VPN network issue
Dustin, The config of both SRXs plus the topology will help us a lot. Something like:...
View ArticleRe: SRX VPN network issue
root@RootsGreendaleWI-SRX100h> show configuration version 10.4R4.5; system { host-name RootsGreendaleWI-SRX100h; time-zone America/Chicago; root-authentication { encrypted-password...
View ArticleRe: SRX VPN network issue
root@RootsBrookfieldWI-SRX210he> show security flow session protocol udp destination-port 500Session ID: 36625, Policy name: self-traffic-policy/1, Timeout: 28, ValidIn: 104.231.234.132/500 -->...
View ArticleRe: SRX VPN network issue
Dustin,Gateway GW-GREENDALE-ATT in SRX100 doesnt have "version v2-only" while it is configured on the SRX210. Can you have them matched? Also let us know what option you chose to use on both.
View ArticleRe: SRX300 No bootable media found. Entering loader prompt.
it warrants a JTAC case to bring this problem to closure.
View ArticleRe: SRX VPN network issue
SRX210 has st0.0 configured with 10.1.124.251 address. I dont this it is needed, can you remove it? Note that you need to leave the "family inet" configured on that interface. So far I have checked the...
View ArticleRe: SRX VPN network issue
I weave to drive to the site so I will make the changes in the morning.Thank you Sent from my iPhone
View ArticleClik here to view.
Re: Why traffic is very slow over ipsec
Hi all msheikoh, I am not sure what your idea is about checking Replay errors? But I did for you. After clearning sec ipsec statistic, during the first 4 hours, two times I checked the replay error...
View ArticleRe: Jweb Incorrect user/password after Junos upgrade on SRX
Hi , There will be no core dumps. Restarting web-management does not help here. No other workaround it seems, only solution is software fix (checking the possibility of D87)
View ArticleRe: How to change ssh default port for extra security in srx1500
Please follow Below link to edit the files. https://www.cs.colostate.edu/helpdocs/vi.html Regards,Ved (JNCIP-SEC)
View ArticleRe: SRX VPN network issue
root@RootsBrookfieldWI-SRX210he# run show security flow session protocol udp destination-port 500Session ID: 47496, Policy name: self-traffic-policy/1, Timeout: 58, ValidIn: 70.92.135.242/500 -->...
View Article