Quantcast
Channel: All SRX Services Gateway posts
Browsing all 17645 articles
Browse latest View live

Re: SRX340 Firmware upgrade

Thanks you for the suggestion and the links.

View Article


Re: SRX340 Firmware upgrade

Your are very welcome; please mark the post as Resolved if you consider that it applies as such. 

View Article


Is it possible to put two vlans or interfaces on the same port?

Hello!!I want to measure several ports and vlans on a bridge but at the same time have virtual routers on the same port, is that possible? I've been trying for several days and looking for information...

View Article

Re: Is it possible to put two vlans or interfaces on the same port?

Hi c0d3 Are you configuring the SRX in transparent mode or you just want to have vlans on the SRX and make sure those vlans can route traffic to other vlans/subnets? If you are looking for the second...

View Article

Re: Is it possible to put two vlans or interfaces on the same port?

It would be more like the second scenario, I have seen the link before and it has clarified a lot, but it gives me trouble with the irb interface and transparent mode would not help me since I want to...

View Article


Re: Is it possible to put two vlans or interfaces on the same port?

Can you provide more details about why you are configuring "web-authentication http" on interface irb.1500? Also share the following command's outputs:     # show interfaces irb    > show...

View Article

SRX-300 J-Web ERR_TUNNEL_CONNECTION_FAILED https access

Hi There,I am trying to access J-Web on my SRX, unfortunately when I try to https browse to it (I have tried Chrome and IE) I am unable to connect. For instance on Chrome I get the error...

View Article

Re: SRX-300 J-Web ERR_TUNNEL_CONNECTION_FAILED https access

Confirm that https is enabled with certificate under the system stanza. And confirm that https is allows for the zone which the ip address is associated undersecurity zones security zone NAME_OF_ZONE...

View Article


Re: SRX-300 J-Web ERR_TUNNEL_CONNECTION_FAILED https access

Hi There,Thanks for your quick response, I believe the config is correct, I have the following ( I am using interface ge-0/0/0.0) networks@HVAR1> show security zonesSecurity zone: CLEARSend reset...

View Article


Re: RTP Stream

The policy appears correct I assume it appears before any allow all policy so it can be engaged.  Assuming the Avaya call processor is also encompassed by the ip addresses in the two ranges you include...

View Article

Re: Is it possible to put two vlans or interfaces on the same port?

Look what I really want to do is connect a service router, (MikroTik), to Juniper's ge-0/0/3 port, but on the same port I want to have several virtual routers and several VLANs, but it tells me that I...

View Article

Is there URGENT/11 Vulnerabilities on SRX?

Hi, I have been looking into URGENT/11 and trying to see if Juniper SRX devices are effected in anyway. Are SRX devices effected by ay of these CVE's? If they are would the latest SRX version patch...

View Article

Juniper SRX web filtering issue with additional proxy server

Problem: Currently we are using UTM web filtering feature to allow only while list web sites through juniper SRX firewall using “juniper-local”, and it is working fine normally. If the device is...

View Article


Re: Juniper SRX web filtering issue with additional proxy server

Juniper-localversion 15.1X49-D130.6; system { host-name ABC01; auto-snapshot; domain-name int.ABC.com; time-zone GMT; name-server { 10.123.103.250; 10.124.134.253; } services { ssh { protocol-version...

View Article

Re: Is there URGENT/11 Vulnerabilities on SRX?

Nick, These vulnerabilities are associated with TCP URG flag being set in TCP sessions. By default Junos will process these packets in the following way: Host-inbound traffic: the URG flag will be...

View Article


Re: Is it possible to put two vlans or interfaces on the same port?

Cod3 In order to confirm what the problem is, I will need to see the configuration you currently have on ge-0/0/3 becuase maybe the existing configuration is avoiding you to configure that port as...

View Article

Juniper SRX and Office 365

Hello, Has anyone had succes with using App-ID signatures to permit Office365 application traffic ? I'm specifically looking at the SRX550 (really hoping it will support this feature and we don't have...

View Article


Re: Is it possible to put two vlans or interfaces on the same port?

Look what I really want to do is connect a service router, (MikroTik), to Juniper's ge-0/0/3 port, but on the same port I want to have several virtual routers and several VLANs, but it tells me that I...

View Article

Re: st0.6 interface not coming up IPSEC VPN

SPC0_PIC2 kmd[184]: IKE negotiation failed with error: Invalid syntax. IKE Version: 1, VPN: ipsec-vpn-TESCO Gateway: gw-TESCO, Local: 185.16.71.132/4500, Remote: 34.250.189.60/4500, Local IKE-ID:...

View Article

Re: SRX-300 J-Web ERR_TUNNEL_CONNECTION_FAILED https access

yes, that config looks correct.   But you would need to add just http to system if you want unencrypted access to respond too. What is the Junos version installed and the chrome version?This might be a...

View Article
Browsing all 17645 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>