Clik here to view.
SRX345 Recovery help
Hi Experts I have run in to some issuese trying to recover a SRX345.First off it has been locked in a few places, console is disabled when it the boot is completed.So logging in to Junos is not...
View ArticleRe: Vrrp generating "%CRYPTO-4-RECVD_PKT_INV_SPI" errors
Hello, wrote:When i set vrrp authentication-key with md5, should the secret data be identical on both routers ? No. Reading the source code of Juniper $9$ encryption algo shows that encrypted...
View ArticleRe: SRX345 Recovery help
@WOLF_OF_DK Without console and/or the reset button, you're out of luck. All recovery routes require some form of this. Even to get the device to boot from USB to recover requires a press of the reset...
View ArticleClik here to view.
SRX320, apps and graphs
I'm testing features of the SRX to see if it can provide us an alternative to our current router selection. System is up and running, consisting of a vSRX with trial licenses, Sky enterprise, and i...
View ArticleBetreff: SRX345 Recovery help
Hello WOLF_OF_DK, the re-installation at the loader prompt would be the right procedure. For me it seems that your installation image is corrupted. Please download a new image and perform a checksum...
View ArticleClik here to view.
Re: SRX320, apps and graphs
Hi!Firstly, here is your SkyEnterprise one stop techie shop! https://www.juniper.net/documentation/product/en_US/juniper-sky-enterpriseNow onto the task at hand!Basically, SkyEnterprise is a cut down...
View ArticleBetreff: SRX345 Recovery help
@AdamHartleyPassword recovery yes, that i imposible but, perhaps the title is misleading, what i need is a reinstall, config is not important.It should be possible, but i am having some trouble doing...
View ArticleBetreff: SRX345 Recovery help
I can assure you that the "loader> install file:///" command is the right one. Please check some other USB devices, make sure they are error free and that they are FAT32 formatted. After copying the...
View ArticleJ-Web broken after Upgrade to 19.4R1.10
Hey all, i just got my SRX300-JSE delivered yesterday and upgraded from 15.1X49-D180.2 to 19.4R1.10. Now J-Web doesnt show any policies and zones. instead it displays just a circle saying "please wait,...
View ArticleBetreff: J-Web broken after Upgrade to 19.4R1.10
Hello, can you please check if this thread resolves your issue? https://forums.juniper.net/t5/SRX-Services-Gateway/SRX340-19-4R1-Firmware-upgrade-issue/td-p/472068
View ArticleRe: J-Web broken after Upgrade to 19.4R1.10
I assume from your description this works correctly in 15.1 and has the issue in 19.4 thus this is going to be a software bug. These are known as PR (problem reports) in Junos. I don't see your...
View ArticleRe: Issue with setting up network admin Auth via. ldap/NPS
Since you can see the request packet arriving on the server but ignored by NPS this means that at least one of the match conditions in your NPS setup for the Juniper client is not correct.
View ArticleBetreff: SRX345 Recovery help
Hi, Can you please verify the size/formatting of the USB drive? I would try both FAT and FAT32 https://kb.juniper.net/InfoCenter/index?page=content&id=KB31622 Alternately you could run a TFTP...
View ArticleRe: SRX320, apps and graphs
Thanks Adam, Well there are no virusses running around AFAIK, as only my Laptop is connected. And I havn't set up a lot of filtering yet. But on the j-web I've got this attached graph for example, and...
View ArticleRe: SRX320, apps and graphs
Hi Ferry, Oh, I see where you are coming from here and to be fair I'm a little stumped here too. As the data is being collected and displayed in JWEB on the vSRX and somehow isn't getting pushed to...
View ArticleEnabling web authentication allows J-web access
We use the web-authentication portal for vendors to log in. After log in the vendor can access internal systems as defined by our security policies and destination NAT rules. This works flawlessly...
View ArticleRe: Enabling web authentication allows J-web access
Hi WSGC,Basically because you have configured WebAuth and JWeb on the same interface WebAuth Passthrough Authentication takes presidence by default, however when errors happen in the WebAuth (aka...
View ArticleRe: Enabling web authentication allows J-web access
Hi Adam,Thanks for the reply. How would I enable web-authentication via HTTPS on the interface without also enabling web management on it? They seem to be linked to me: one can only cofigure a...
View ArticleNetflow / ip Cache flow commands for Juniper SRX240 OS15
Hi All, Are there any equivalent commands like :show ip flow top-talkers" or "Show ip accounting" or "Show ip cache flow" on Juniper SRX240 firewall ? I am aware of the "monitor traffic interface"...
View ArticleRe: Netflow / ip Cache flow commands for Juniper SRX240 OS15
Hello, I believe on-box logging is what you are looking for. https://www.juniper.net/documentation/en_US/junos/topics/concept/security-on-box-reporting-understanding.html Unfortunately, this is not...
View Article