Hi MarcTB !
Currently I have 01 USB3G Sierra 306. I have tried with following configuration (attach file)
But interface cl-0/0/8 always in connecting state:
show interfaces cl-0/0/8 extensive
Physical interface: cl-0/0/8, Administratively down, Physical link is Up
Interface index: 143, SNMP ifIndex: 532, Generation: 146
Type: Async-Serial, Link-level type: PPP-Subordinate, MTU: 1504, Clocking: Unspecified, Speed: 3G MODEM
Device flags : Present Running
Interface flags: Admin-Test Point-To-Point SNMP-Traps Internal: 0x0
Link flags : None
CoS queues : 8 supported, 8 maximum usable queues
Last flapped : Never
Statistics last cleared: Never
Traffic statistics:
Input bytes : 0 0 bps
Output bytes : 57216 0 bps
Input packets: 0 0 pps
Output packets: 447 0 pps
Input errors:
Errors: 0, Drops: 0, Framing errors: 0, Runts: 0, Giants: 0, Policed discards: 0, Resource errors: 0
Output errors:
Carrier transitions: 0, Errors: 0, Drops: 0, MTU errors: 0, Resource errors: 0
Egress queues: 8 supported, 4 in use
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 0 0 0
1 expedited-fo 0 0 0
2 assured-forw 0 0 0
3 network-cont 0 0 0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
MODEM status:
Modem type : Sierra Wireless Aircard DirectIP GSM
Initialization command string : AT&C1
Initialization status : Ok
Call status : Connecting
Packet Forwarding Engine configuration:
Destination slot: 0 (0x00)
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer Priority Limit
% bps % usec
0 best-effort 95 7125000 95 0 low none
3 network-control 5 375000 5 0 low none
Logical interface cl-0/0/8.0 (Index 80) (SNMP ifIndex 535) (Generation 145)
Flags: Point-To-Point SNMP-Traps Encapsulation: PPP-Subordinate
Security: Zone: Null
Flow Statistics :
Flow Input statistics :
Self packets : 0
ICMP packets : 0
VPN packets : 0
Multicast packets : 0
Bytes permitted by policy : 0
Connections established : 0
Flow Output statistics:
Multicast packets : 0
Bytes permitted by policy : 0
Flow error statistics (Packets dropped due to):
Address spoofing: 0
Authentication failed: 0
Incoming NAT errors: 0
Invalid zone received packet: 0
Multiple user authentications: 0
Multiple incoming NAT: 0
No parent for a gate: 0
No one interested in self packets: 0
No minor session: 0
No more sessions: 0
No NAT gate: 0
No route present: 0
No SA for incoming SPI: 0
No tunnel found: 0
No session for a gate: 0
No zone or NULL zone binding 0
Policy denied: 0
Security association not active: 0
TCP sequence number out of window: 0
Syn-attack protection: 0
User authentication errors: 0
I see that you have tried Sierra 306, could you share your configuration and firmware on USB 306
Thanks and Best Regards
Nam