advertise OSPF static routes into stub/t-stub

is it possible to adverise static routes into these? 

we have some SOHO routers that come back to and SRX 240 ( about 30 of them 

each SOHO bring up OSPF when the tunnle comes up this is so i dont have to put a bunch of static pointing to the ST0.x interfaces for all the /29s 

I have a requirement to for some internet adds to come back here and go out a private connection to a vender, the SOHO boxes are trying to use the internet for this, makes sense. 

I know i can fix this if i add the statics to the SOHO routers so that traffic goes of the tunnle, but it would be much cleaner and easier to update the list if I could put them on the 240 and use the OSPF that is already in place to do this 

I have a tried a policy to redistrubte static but i have little expeance with stub networks, every place i have work in the past was always full mesh back bone. 

Thanks for the help 

240 (st0.0 to st0.36)

ospf {
export [ direct-opsf exportstatic1 ];
area 0.0.0.50 {
stub default-metric 1 no-summaries;
interface st0.1 {
interface-type p2p;
authentication {

area 0.0.0.0 {
interface vlan.0;

policy-statement direct-opsf {
term T1 {
from protocol [ direct static ];
}
}
policy-statement exportstatic1 {
term exportstatic1 {
from protocol static;
then accept;

SOHO 

ospf {
area 0.0.0.50 {
stub;
interface st0.0 {
interface-type p2p;
authentication {

}
interface vlan.1;
interface lo0.0;