Hello,
Andrewmiller wrote:is it possible to adverise static routes into these?
No. See RFC 2328 section 3.6
https://www.ietf.org/rfc/rfc2328.txt
Andrewmiller wrote:
240 (st0.0 to st0.36)
ospf {
export [ direct-opsf exportstatic1 ];
area 0.0.0.50 {
stub default-metric 1 no-summaries;
interface st0.1 {
interface-type p2p;
authentication {
area 0.0.0.0 {
interface vlan.0;
policy-statement direct-opsf {
term T1 {
from protocol [ direct static ];
}
}
policy-statement exportstatic1 {
term exportstatic1 {
from protocol static;
then accept;
The config above will inject external LSA into area 0 only. Area 50 will have only internal and 0/0 route which begs a question -why do You need to redistribute statics into Area 50 in 1st place?
HTH
Thx
Alex