Re: How to configure SRX240 ports as switch ports
Hi Folks,Please find an example on the same, Default ethernet switch configuration.The following procedure shows the default configuration for Ethernet switching on interfaces on a SRX210 device. The...
View ArticleIs SRX300 support USB modem?
Hi, I've looking for explanation is SRX300 support USB modem or not. I find no explanation about that on knowledge base, datasheet, or other website. Is there anyone know is SRX300 support USB modem or...
View ArticleRe: Is SRX300 support USB modem?
Are you referring to "Connecting to the SRX300 Services Gateway CLI Using a Dial-Up Modem"? if so please refer to below URL....
View ArticleRe: How to configure for pass-through the HTTPS traffic to web authentication...
you just need to add "application junos-https" on the security policy with "pass-through auth"
View ArticleRe: Is SRX300 support USB modem?
Hi rsuraj, My question refferng to 3G/4G modem conectivity using USB. OK then, if that is not supported Thank you for information, Regards,
View ArticleRe: How to turn off "The SRX no longer provides hosting of the Pulse Client...
do you have dynamic VPN configured on that interface? If not you may turn off HTTP/HTTPS access to that interface.
View ArticleRe: Security log flow time zone not same with syslog time zone in SRX58000?
You need NTP . If you do not set NTP in the SRX configuration, the time on the SPU, SPC, RE, CPP are different. https://kb.juniper.net/KB16848https://kb.juniper.net/KB24067
View ArticleRe: SRX 650 IDP Signatures Update fails
Its always recommended to run any supported/latest version.
View ArticleRe: Is SRX300 support USB modem?
I believe the idea would be for the 3G/4g be a Failover connection of the ISP goes down?If Memory serves me right, this function was available in the Older SRX Branch Models.. They even kept a list of...
View ArticleRe: Security log flow time zone not same with syslog time zone in SRX58000?
Hi rsuraj, I have NTP and the issue the FPC time zone not same with Control Plane time zone. JTAC already give instruction how to set manually clock on FPC but today it still fail. This case already...
View ArticleClik here to view.
DNS suffix for dynamic VPN on the SRX3xx platform
Hello all, I am running 15.1X49-D60.7 on my SRX320. I am using dynamic VPN. Once connected via DVPN, I cannot ping any of my internal servers by their hostnames. However, I can ping them with their IP...
View ArticleRe: DNS suffix for dynamic VPN on the SRX3xx platform
Hi , DNS suffix is still not supported for the dynamic VPN's. I don't think there is any workaround available for now. Regards,Rishi
View ArticleRe: DNS suffix for dynamic VPN on the SRX3xx platform
Thanks for the reply. Too bad though.
View ArticleDynamic VPN DHCP relay
Hello, I am using dynamic VPN on an SRX320. Is it possible to configure DHCP for the dynamic VPN clients on a separate server and then have the SRX relay requests to that server? Or does DHCP for...
View ArticleRe: Dynamic VPN DHCP relay
Dynamic VPN clients don’t use DHCP to get address . You need to have the IP address pool on SRX, you may use a Radius server for authentication and address assignment instead of local authentication...
View ArticleRe: Dynamic VPN - 12.3X48-D40.5
You seem to have the work around figured out and will need to wait for further releases for a permanent fix. Since you don't have support, you could submit a note via the PR database system on the PR...
View ArticleRe: is there backup-remote-gateway statement for SRX also or
Seems like as of 2014 this is still just using DPD for the detection mechanism. As such, no failback would be available. https://kb.juniper.net/InfoCenter/index?page=content&id=KB29211
View ArticleRe: Dynamic VPN - 12.3X48-D40.5
Thanks. I just submitted my feedback to the PR. I don't expect personal support without a subscription, but I was staggered that there is not even away to submit bug reports although I have a...
View ArticleIPIP Tunnel source with DHCP
I am attempting to set up an ipip tunnel from an SRX. The Internet interface is DHCP and the tunnel source is requiring an IP rather than an interface. My thought was to source the tunnel from a...
View Article