Re: SRX220 /jail/var over capacity
Can you share below output? This will help us to identify the bigger files. And then we can delete them based on the type, make sure we dont delete the OS files.root@SRX> start shell user root...
View ArticleRe: SRX300 guided setup fail, syntax error
Can you share the exact error, the attachment is not very readable. You may also try below things root@SRX> start shell user root root@SRX% mgd -I then perform commit or commit full
View ArticleRe: Dynamic VPN
https://www.pulsesecure.net/techpubs/pulse-client/pulse-secure-client-mobile/5.2rx
View ArticleClik here to view.
Re: SRX300 guided setup fail, syntax error
Dear Suraj,Thanks for your reply. This is the error I have. I am using SRX300 and having 15.1X49-D60.7 firmware.After finished guided setup and apply settings, the error appears. Today I try again with...
View ArticleClik here to view.
Re: Dynamic VPN
That's only the release notes. You need a support contract with Pulse Secure to download clients. Juniper should update the possible VPN clients which can be downloaded from themselves as this is...
View ArticleRe: Two Policy based VPN with automatic failover
Hi Anand, Basically my design includes two ISP links with two active VPN on each ISP which carring traffic from different source subnets and two backup VPNs on each ISPActive VPN'sVPN1 on ISP1 -...
View ArticleRe: Two Policy based VPN with automatic failover
Please see my reply below and suggest.Thanks
View ArticleRe: vSRX 15.1 D50 cannot add ge- interfaces
Hi, This thread is a bit old, but I'll share my case anyway. I had exactly the same problem running vsrx 15.1D50 on a kvm hypervisor. I figured that running the vm with 4096 MB of memory was not...
View ArticleRe: SRX220 /jail/var over capacity
Certainly. Here you go: 1522076 /cf1212336 /cf/var1201132 /cf/var/log1200416 /cf/var/log/httpd.log291808 /cf/packages291776 /cf/packages/junos-12.1X44-D35.5-domestic10740 /cf/var/db10304...
View ArticleRe: SRG 320. IPSEC vpn worked then got flakey
Yes, I do. But, I had to reconfigure is since i took it out of the customers network and put it on my own for testing. So at this point I'm not sure if it's the reconfiguration that is the issue or...
View ArticleRe: Site to Site VPN between a SRX w/dynamic IP to SRX w/static IP
Thank you for the questions. 1. When i configure the ISP to bridge mode, then it works. But as soon as I reconfigure back to NAT, the tunnel will not establish. 2. Here is what the config looks like...
View ArticleRe: Site to Site VPN between a SRX w/dynamic IP to SRX w/static IP
root@2845HOME> show security ipsec inactive-tunnels Total inactive tunnels: 1 Total inactive tunnels with establish immediately: 1 ID Port Gateway Tunnel Down Reason 131073 500 108.160.195.135 No...
View ArticleRe: Site to Site VPN between a SRX w/dynamic IP to SRX w/static IP
home type modems are very bad about blocking the traffic, AT&T uverse is the worse i have found, followed by fronteir you need to set hte etherport as an external port, turn of any ALG and most of...
View ArticleRe: SRG 320. IPSEC vpn worked then got flakey
ogod why is this happening dadmin> show security ike security-associationsIndex State Initiator cookie Responder cookie Mode Remote Address3110702 UP f475ec820a37d1ba aed33efc4df02990 Aggressive...
View ArticleSRX 3400 in Cluster config is synced but new configuration is not applying
Hi We have two SRX 3400 running in Cluster, in RG1 one physical interface is down so all services are running through one firewall everything was fine but suddenly when are applying new configuration...
View ArticleRe: SRX firewall routing configuration
Hi, In need for your help please,to know the reason of gettingrejectto one of the interfaces! is it because no route defined to use it? is it because no use of related zone, in any security policy as...
View ArticleRe: SRX 3400 in Cluster config is synced but new configuration is not applying
This looks like your cluster is not healthy because of communications channels between the devices. You can verify this by looking at: show chassis cluster statusshow chassis cluster interfaces...
View ArticleWhat do I need to VPN to a SRX100 from a laptop
Would like to set a SRX100 as the front facing end for management to a group of EX switches.The device connecting to it is a laptop to connect to the switches.Can the Pulse Secure client work, can we...
View ArticleRe: What do I need to VPN to a SRX100 from a laptop
Hi Starlog, Yes you can pulse secure client to connect to the SRX. You will have to configure dynamic VPN on the SRX hundred so that the laptop connects to the SRX throguh VPN and through VPN you can...
View Article