Quantcast
Channel: All SRX Services Gateway posts
Browsing all 17645 articles
Browse latest View live

SRX1400 hit-counts and security policies bug?

Hi, For the past few hours I've been struggling with a weird issue in my SRX1400 cluster (running Junos 12.1X46-D40.2) and now I think I've found a bug in Junos. I'd be grateful if someone could...

View Article


SRX1500 Cluster - Possible bug with reth interfaces

Hi, This is a pretty new product and I'm configuring a Chassis Cluster of it.I'm running the current recommended version 15.1X49-D40 and I found a problem that if it is a bug it is very bad because it...

View Article


Re: SRX1500 Cluster - Possible bug with reth interfaces

A small update.It seems that a "commit full" solves the problem...Nevertheless it is not a normal situation and have openned a case.

View Article

DHCP Client not working?

Software Version: JUNOS Software Release [12.1X46-D35.1]Bios Version: 1.9 I have configured dhcp client on ge-0/0/0.0 as described on this site.  I have also troubleshooted using all tips on this site....

View Article

IP BASE QoS

can i configure an ip base qos on SRX 240I consult the configuration guideclass must be DSCP/IP PR/TOS

View Article


Image may be NSFW.
Clik here to view.

Re: DHCP Client not working?

Hello,  As per your description of the issue it seems that you are trying to setup SRX as a DHCP client on the interface ge-0/0/0. Please let me know if you have everything configured as per the below...

View Article

Re: DHCP Client not working?

this is the minimum configuration I've used for the SRX and sometimes this has required a reboot for the successful attainment of an address on the interface. set interfaces ge-0/0/0 unit 0 family inet...

View Article

Re: DMVPN supported in SRX/JunOS?

To update this old thread, Juniper now has ADVPN which is similar to Cisco DMVPNhttps://www.juniper.net/documentation/en_US/junos12.3x48/topics/concept/security-auto-discovery-vpn-understanding.html

View Article


SRX100 - VPN Problem: packet dropped, no way(tunnel) out

Hello,I'm quite new with junos and I have set up a SRX100 and configured a VPN betweenSRX and  ISG1000The VPN is UP and traffic is ok from the PC behind the srx to the other LAN, but it's not working...

View Article


Re: IP BASE QoS

Are you asking if youcan classify traffic based on IP address? if so yes. Use a firewall filter called a multifield classifier. This article should...

View Article

Re: SRX cluster with routing instances

I'm back working on this issue (was working on other things, and now this is important again).  What I really want to have happen is that all "Corp" traffic gets routed out ISP2, while VoIP traffic,...

View Article

Image may be NSFW.
Clik here to view.

Re: SRX100 - VPN Problem: packet dropped, no way(tunnel) out

Hello, As per the above logs i believe you are seeing the packets getting dropped on the ISG side. As per the logs please check the route and policy on the ISG side for the traffic from LAN on the ISG...

View Article

SRX VoIP Configuration

Hello all! I have a setup with 2 SRX220's, in a clustered setup.  They have about 25 IP phones/devices, connecting to Vonage Business (Vocalocity) over a dual WAN setup.  I have filters, and NAT...

View Article


Re: SRX VoIP Configuration

Hello Sean , Considering that you have tried disabling the ALGs , Have you tried failing over the cluster to the other Node and check if you are getting the same results . Also for a quick fix , if...

View Article

Re: SRX100 - VPN Problem: packet dropped, no way(tunnel) out

Are you sure it's on isg1000 side ? Because I've already checked all routes from isg1000 to SRX and on the logs looks like the traffic go til the last hop before the SRX and can't enter IN ? Can you...

View Article


SRX IPv6 Heartbeat Tunnel with SixXS PoPs

Hi Is there a way to setup a Heartbeat tunnel with SixXS PoP in SRX devices (I am it in packet mode to remove complications). I know a Static Tunnel can be set but I couldn't find any information on a...

View Article

vlan interface apparently not up without fe-0/0/x ethernet-switching family...

Hello, I have a config with a bunch of ethernet-switching fe-0/0/x interfaces and one vlan.0 interface.  The vlan.0 interface runs ssh and some other services.  I am trying to access the ssh server...

View Article


Skype Business desktop sharing

I am unable to get our SRX220 to fully support Skype 4 Business desktop sharing in a branch office. Skype4B calls, internet access etc. works without any problems, only desktop sharing fails 9 of 10...

View Article

Console access to SRX without serial?

Serial console access is becoming more difficult of late with laptops not including a serial port and usb serial dongles being temperamental. Is there a way to connect via ethernet to an SRX and get an...

View Article

Re: vlan interface apparently not up without fe-0/0/x ethernet-switching...

Hello, vlan.0 is a logical interface. Actual SSH traffic destined to vlan.0 IP comes on any of the L2 interfaces which are part of the same vlan as vlan.0 interface.So at least one L2 interface should...

View Article
Browsing all 17645 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>