Re: 300 series license
Thanks, so much like the older SRX models then. The datasheet doesn't mention the licenses by partcode as other datasheets tend to. Do you know which is JSB and JSE?
View ArticleRe: 300 series license
According to the footnotes, the Application Security Services (NGFW features) are JSE.
View ArticleI'm not set command on SRX220H
Hello, I'm no views full commande and set ? Why ? i'm viewing simply root@gw-1> set ? Possible completions: chassis Set chassis properties cli Set CLI properties date Set system date and time I'm no...
View ArticleRe: I'm not set command on SRX220H
Hi, You will need to go into configuration mode.http://www.juniper.net/documentation/en_US/junos13.3/topics/task/configuration/junos-cli-configuration-mode-entering-exiting.html
View ArticleRe: I'm not set command on SRX220H
ho thank you I 'm forgetting his long I are no longer touching the system thank you anyway :)
View ArticleSRX300 series VLAN interface
I have been configuring an SRX320 for the first time.[edit vlans]root@lab-01# run show version Hostname: lab-01Model: srx320Junos: 15.1X49-D45JUNOS Software Release [15.1X49-D45] I noticed that under a...
View ArticleClik here to view.
Re: SRX300 series VLAN interface
Hello, I would like to inform you that starting from version 15.1X+ the vlan interface is no longer supported on SRX and instead irb interface will be used for the same purpose. You can use the...
View ArticleRe: SRX300 series VLAN interface
Thanks for the response. I had already configured all those things, please see below: [edit]root@hen-fw-01# show vlans v-100 { vlan-id 100; l3-interface irb.100;}[edit]root@hen-fw-01# show interfaces...
View ArticleRe: How to add huge list of ips to prefix-list using CLI
for some reasons in both way when Iload merge file some IPs are different ?!? very wierdor with other option load merge relative terminalI paste from a simple text all the IPs with all line ending ";"...
View ArticleRe: SRX300 series VLAN interface
Be sure to put the SRX300 into switching mode as well: http://www.juniper.net/techpubs/en_US/junos15.1x49-d40/topics/concept/security-layer2-bridging-switching-overview.html By default SRX300 is in...
View Articlesecure-wire for aggregated interface member links documented design is not...
Hello collegues,I'm testing secure-wire on srx in junos 12.3x48 using...
View ArticleRe: How to add huge list of ips to prefix-list using CLI
Hi, Can you share a sample prefix list file so I can test it. Cheers,Ashvin
View ArticleClik here to view.
Re: SRX300 series VLAN interface
Hello, Have you rebooted the SRX after configuring the IRB interface. If not then please reboot it and check if it works becasue When we configure a device as Ethernet switch , the mode changes to mix...
View ArticleClik here to view.
Re: Static route depending on vpn state?
Hello, When you say that you see the static routes to be still present even if the st0.x interface is down, do you see that status in the show interfaces terse output or you saying that just becasue...
View Articlekernel: watchdog: Time since last watchdog
Hi all, I want to see the message kernel: watchdog: Time since last watchdogis no longersent to the syslogserver I have already tried the KB...
View ArticleClik here to view.
Re: After a successful commit changes don't take effect
Hello, To answer your query i would need the following information:- What is the SRX model you are using.What is the version running on your SRX.Are you configuring the security NAT/ policies in the...
View ArticleClik here to view.
Re: IPSEC site-to-site --> Traffic not go through tunnel every 7 days?
Hello, The configruation for the VPN tunnel looks prefectly fine and should not cause any such issues ideally. To investigate upon the issue we would need the following logs at the time of the issue:-...
View ArticleDHCP option 43/125 for Mitel
Has anyone successully configured option 43 or 125 for Mitel phones? Does this have to be in a byte stream? The details are:TFTP: 10.10.10.20RTC: 10.10.10.20Mitel IP phone: MITEL IP PHONEMitel...
View ArticleRe: How to add huge list of ips to prefix-list using CLI
http://pastebin.com/kqWtN4qT I found out that It works fine(loading 200 ips at the time , it looks that goes in crash(alter the text) when there are more than 400 records) if I use serial connection...
View Article